Serving Erwin, North Carolina and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Erwin, NC

Washing machine repair from independent technicians serving Erwin, with ratings, distances and what to check before you call.

Water sitting in the washer in Erwin?
One call connects you with a local technician who repairs front-load and top-load washers.
☎(866) 293-4411
✓12 companies listed for Erwin✓Independent, not a manufacturer✓Public ratings & distances

Washers fail in fairly predictable ways, which is good news: many repairs are a single part that a technician can replace in one visit. This page lists independent appliance repair companies serving Erwin and the Harnett County area, with companies that mention washer work shown first.

Local Washing Machine Repair in Erwin, NC

Our data shows 40 appliance repair companies inside a 30-mile radius of Erwin. The rest are spread across Fayetteville (13), Fuquay-Varina (4), and Dunn (2). 8 of them mention washing machine or washer work in their listing or website. Nearest on the list: Sears Appliance Repair, around 3.1 miles out. Across 39 rated companies, the average public rating is 4.2 stars.

Washer & Dryer Repair
Sears Appliance Repair
1002 W Cumberland St, Dunn, NC 28334
3.1 mi from Erwin
★★★★½ 4.6 (128 reviews)
Mentions LG, Samsung, WhirlpoolMentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
2515 S Horner Blvd, Sanford, NC 27332
28.1 mi from Erwin
★★★★½ 4.6 (248 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
One Source Appliance Repair
1148 Wade Stephenson Rd, Holly Springs, NC 27540
20.7 mi from Erwin
★★★★½ 4.7 (239 reviews)
Mentions washers
Washer & Dryer Repair
Sears Appliance Repair
419 Cross Creek Mall, Fayetteville, NC 28303
23.7 mi from Erwin
★★★★½ 4.5 (589 reviews)
Mentions washersSaturday hours
Appliance Repair
Heating And Air Conditioning & Washer Fayetteville
5955 Cliffdale Rd, Fayetteville, NC 28314
24.9 mi from Erwin
★★★★½ 4.5 (6 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Mr. Appliance of Sanford
675 Seminole Rd, Broadway, NC 27505
22.6 mi from Erwin
★★★★½ 4.6 (142 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Southeastern Appliance Repair southeasternappliancerepairs@gmail.com
Haonani Dr, Skibo Rd, Fayetteville, NC 28303
22.6 mi from Erwin
★★★★ 4.2 (85 reviews)
Mentions washers
Washer & Dryer Repair
Appliance Repair Fayetteville NC
1215 Deep Creek Rd, Fayetteville, NC 28312
22.7 mi from Erwin
★★★★½ 4.4 (14 reviews)
Mentions washers
Appliance Repair
Hometown Appliance Repair
109 Hay St Ste 202, Fayetteville, NC 28301
19.0 mi from Erwin
★★★★★ 4.9 (465 reviews)
Appliance Repair
Cobb Sales & Service
215 E Main St, Benson, NC 27504
8.2 mi from Erwin
★★★★★ 4.8 (49 reviews)
Saturday hours
Appliance Repair
Moore Appliance Service
2929 Breezewood Ave Ste 100A, Fayetteville, NC 28303
25.8 mi from Erwin
★★★★★ 4.9 (479 reviews)
Appliance Repair
Swift Appliance Repair
5035 Tura St, Raleigh, NC 27610
29.8 mi from Erwin
★★★★★ 5.0 (127 reviews)
Saturday hours

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

Erwin repair companies in numbers
Companies within 30 miles40
Rated 4.5 stars or higher (10+ reviews)17
Distance to the three closest (mi)3.1, 3.6, 8.2
Mention a major washer brand1
Listing Saturday hours26
Name washers or washing machines in their listing8

At the top of the Erwin list: Sears Appliance Repair (3.1 miles away, based in Dunn, 4.6 stars from 128 reviews, lists Saturday hours); Sears Appliance Repair (28.1 miles away, based in Sanford, 4.6 stars from 248 reviews, lists Saturday hours); One Source Appliance Repair (20.7 miles away, based in Holly Springs, 4.7 stars from 239 reviews); Sears Appliance Repair (23.7 miles away, based in Fayetteville, 4.5 stars from 589 reviews, lists Saturday hours).

⚡ Skip the calling around: we will find a washer tech for you
☎(866) 293-4411

When to Call for Washer Repair

  • Burning smell or a motor that hums without turning
  • Water left in the drum after the cycle
  • Washer will not spin, or clothes come out soaking wet
  • Washer fills slowly, will not fill, or keeps filling

Why Washing Machines Break Down

Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.
Hoses, seals and the door bootFill hoses age and crack, drain hose clamps loosen, and the rubber door boot on a front loader can tear or trap water. Leaks usually start small under the washer before they show on the floor.
Suspension and bearingsShock absorbers, dampers and springs hold the tub steady during the spin. When they wear, the washer bangs and walks. Worn drum bearings make a rumbling or grinding noise that gets louder on the spin cycle.

Inside a Washer Repair Visit

Tub bearings and sealA rumble or roar that gets louder as the drum speeds up usually means worn bearings, often after a tub seal has let water reach them. It is one of the bigger repairs, so the technician will compare it with the washer's age and value.
Water inlet valve and hosesAn electric valve meters hot and cold water in. A technician checks its inlet screens for sediment and tests its coils when the washer fills slowly, will not fill, or will not stop filling.
Drive belt, coupler and motorBelt-drive washers turn the drum with a belt; others use a motor coupling or a direct-drive motor bolted to the tub. A hum with no movement, a burning smell or a drum that turns by hand too easily points here.

Troubleshooting first? Start with washer smells like mildew or washer not filling with water.

If Your Washer Is Leaking

Whirlpool recommends replacing washer fill hoses every five years to lower the risk of a hose failing and leaking. Source: Whirlpool - Washing Machine Fill Hoses

Unplug the washer before servicing or cleaning it; pressing the power button does not disconnect it from the electrical supply. Source: GE Appliances - Washer Owner's Manual

More: where washer leaks come from.

Washing Machine Repair Cost Ranges

A washer repair is usually a single part plus labor. Reference ranges from published cost guides:

Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Around Erwin

Most washer calls in Erwin come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

North Carolina has no license specific to appliance repair; work on gas appliances, fuel piping and heating equipment is regulated by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors, with an exemption for minor repairs that don't change fuel type, venting or piping. Source: N.C. Gen. Stat. ยง 87-21 (NC General Assembly)

In North Carolina, you can check a license with the NC Plumbing, Heating and Fire Sprinkler Board public license search or report a problem to the North Carolina Department of Justice, Consumer Protection Division.

Hiring a Washer Repair Company in Erwin

  • How often do you repair your brand washers, and how quickly can you get parts?
  • Can you give a written estimate before ordering parts?
  • Will you check the drain pump filter and drain hose before replacing the pump?

Washing Machine Repair FAQs: Erwin, NC

What stops a washer from spinning?
An unbalanced load, water that will not drain, or a lid switch or door lock that is not engaging stops most spin cycles. If those check out, a technician looks at the drive belt, motor coupling, motor and control.
Is there anything I can try first?
Make sure the washer is plugged in and the outlet works, the lid or door closes fully, and both water valves are open. If the washer is leaking, unplug it and turn off both supply valves before doing anything else.
Where is the water under my washer coming from?
Common sources are a loose or cracked fill hose, the drain hose connection, a torn door boot on a front loader, too much detergent causing suds overflow, or a leaking pump or tub seal. Unplug the washer and shut both valves, then look where the water starts.

Find Your Washer Brand in Erwin

Washing Machine Repair Near Erwin

Before you call a Erwin technician, check that the washer is plugged in, the hot and cold valves behind it are open and the drain hose is not kinked. If it is a front loader, clean the drain pump filter. If the problem stays, have the model number ready.

One call to reach a local washing machine repair company
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech