A washer that stops mid-cycle with a drum full of water turns a normal laundry day into a mess of wet towels and trips to the laundromat. We pull these listings from public business data, remove closed businesses, parts stores and unrelated trades, and put companies that mention washers at the top.
Local Washing Machine Repair in Angier, NC
Our data shows 40 appliance repair companies inside a 30-mile radius of Angier. 1 list an address in Angier, and other nearby bases include Raleigh (13), Cary (6), and Fuquay-Varina (4). Distances run up to about 23 miles. 9 of them mention washing machine or washer work in their listing or website. Nearest on the list: LAJ Appliance Services, around 4.9 miles out. Rated companies nearby average 4.2 stars across 38 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Repair companies inside 30 miles | 60 |
|---|---|
| Three nearest companies, miles away | 4.9, 5.3, 6.3 |
| Mention a major washer brand | 1 |
| With 4.5+ stars and at least 10 reviews | 26 |
| Listing Saturday hours | 36 |
| Name washers or washing machines in their listing | 12 |
At the top of the Angier list: Mr. Appliance of Cary (17.8 miles away, based in Cary, 4.9 stars from 1,970 reviews, lists Saturday hours); Sears Appliance Repair (15.4 miles away, based in Dunn, 4.6 stars from 128 reviews, lists Saturday hours); One Source Appliance Repair (9.3 miles away, based in Holly Springs, 4.7 stars from 239 reviews); Sears Appliance Repair (22.9 miles away, based in Sanford, 4.6 stars from 248 reviews, lists Saturday hours).
Washer Problems Worth a Service Call
- Loud banging, shaking or walking during the spin
- Washer will not spin, or clothes come out soaking wet
- Grinding or roaring noise that rises with spin speed
- Water on the floor under or in front of the washer
What Usually Goes Wrong
What Gets Fixed on a Angier Washer Call
Troubleshooting first? Start with washer smells like mildew or washer not filling with water.
Water, Power and Safety First
Always install new inlet hoses rather than reusing old ones, check them from time to time, and replace any hose that shows bulges, kinks, cuts, wear or leaks. Source: Whirlpool - Washer Installation Instructions
Plug the washer into a grounded three-prong outlet on a 15- or 20-amp 120-volt circuit, and never remove the ground prong or use an adapter or extension cord. Source: Whirlpool - Washer Installation Instructions
Set the washer on a solid floor with no more than about 1 inch of slope under the cabinet, adjust the leveling feet, and tighten the locknuts against the cabinet; loose locknuts can cause vibration. Source: Whirlpool - Washer Installation Instructions
More: where washer leaks come from.
Washing Machine Repair Cost Ranges
Most washing machine repairs come down to one part and an hour or two of labor, which is why many are worth pricing before you shop for a new washer. Published ranges:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What Angier Owners Should Know
Most washer calls in Angier come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
North Carolina has no license specific to appliance repair; work on gas appliances, fuel piping and heating equipment is regulated by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors, with an exemption for minor repairs that don't change fuel type, venting or piping. Source: N.C. Gen. Stat. ยง 87-21 (NC General Assembly)
In North Carolina, you can check a license with the NC Plumbing, Heating and Fire Sprinkler Board public license search or report a problem to the North Carolina Department of Justice, Consumer Protection Division.
Hiring a Washer Repair Company in Angier
- Will you check the drain pump filter and drain hose before replacing the pump?
- What guarantee do you give on parts and labor?
- What is the service call or diagnostic fee, and is it applied to the repair?
Washing Machine Repair FAQs: Angier, NC
Is there anything I can try first?
Why does my washer shake or walk across the floor?
Which areas near Angier do these technicians cover?
Brand-Specific Washer Repair, Angier
Washing Machine Repair Near Angier
A clear drain filter, open supply valves and the model number in hand make any washer repair in Angier faster and cheaper.