Serving Garner, North Carolina and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Garner, NC

A local list of washer repair companies near Garner, NC, sorted by how closely they match the work, then by distance and public ratings.

Washer down in Garner?
One call connects you with a local technician who repairs front-load and top-load washers.
☎(866) 293-4411
✓12 companies listed for Garner✓Independent, not a manufacturer✓Public ratings & distances

When a washer quits in Garner, the first question is whether it is a clog or a setting you can clear yourself or a failed part, and that decides whether you need a technician at all. The Garner list below starts with companies that show washer work in their listings, followed by other appliance repair companies nearby.

Who Repairs Washers Near Garner

Our data shows 40 appliance repair companies inside a 30-mile radius of Garner. 2 list an address in Garner, and other nearby bases include Raleigh (19), Cary (6), and Fuquay-Varina (4). The farthest listed company is about 16 miles out. 8 list washing machine or washer work specifically. Nearest on the list: Ark Appliance Repair Service LLC., around 1.5 miles out. The 38 rated companies in range average 4.2 stars.

Washer & Dryer Repair
Mr. Appliance of Cary
204 New Edition Ct, Cary, NC 27511
10.6 mi from Garner
★★★★★ 4.9 (1,970 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
1002 W Cumberland St, Dunn, NC 28334
26.3 mi from Garner
★★★★½ 4.6 (128 reviews)
Mentions LG, Samsung, WhirlpoolMentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
4500 Western Blvd, Raleigh, NC 27606
7.9 mi from Garner
★★★★½ 4.5 (197 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
8701 Six Forks Rd, Raleigh, NC 27615
14.3 mi from Garner
★★★★½ 4.6 (212 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
One Source Appliance Repair
1148 Wade Stephenson Rd, Holly Springs, NC 27540
17.9 mi from Garner
★★★★½ 4.7 (239 reviews)
Mentions washers
Washer & Dryer Repair
Sears Appliance Repair
4601 Glenwood Ave # 1 1, Raleigh, NC 27612
10.8 mi from Garner
★★★★½ 4.7 (199 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
7330 Old Wake Forest Rd, Raleigh, NC 27616
12.2 mi from Garner
★★★★½ 4.3 (571 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
One Source Appliance Repair
8601 Six Forks Rd Unit 400, Raleigh, NC 27615
14.2 mi from Garner
★★★★½ 4.6 (135 reviews)
Mentions washers
Washer & Dryer Repair
Durham Appliance Thrift and Repair LLC
3308 Durham-Chapel Hill Blvd #123, Durham, NC 27707
26.6 mi from Garner
★★★★★ 4.9 (173 reviews)
Mentions washers
Washer & Dryer Repair
Sears Appliance Repair
2016 Creekside Landing Dr, Apex, NC 27502
15.3 mi from Garner
★★★★½ 4.4 (236 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
The Appliance Service Center of Raleigh
709 W Peace St, Raleigh, NC 27605
6.8 mi from Garner
★★★★ 4.1 (100 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
1620 Guess Rd, Durham, NC 27701
27.9 mi from Garner
★★★★½ 4.5 (385 reviews)
Mentions washersSaturday hours

Companies are shown by relevance and distance from Garner. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.

Washer repair near Garner at a glance
Name washers or washing machines in their listing9
Repair companies inside 30 miles60
Distance to the three closest (mi)1.5, 4.4, 4.8
Listing Saturday hours33
With 4.5+ stars and at least 10 reviews24
Mention a major washer brand0

At the top of the Garner list: Mr. Appliance of Cary (10.6 miles away, based in Cary, 4.9 stars from 1,970 reviews, lists Saturday hours); Sears Appliance Repair (26.3 miles away, based in Dunn, 4.6 stars from 128 reviews, lists Saturday hours); Sears Appliance Repair (7.9 miles away, based in Raleigh, 4.5 stars from 197 reviews, lists Saturday hours); Sears Appliance Repair (14.3 miles away, based in Raleigh, 4.6 stars from 212 reviews, lists Saturday hours).

⚡ Tell us what your washer is doing and we will connect you
☎(866) 293-4411

Washer Problems Worth a Service Call

  • Burning smell or a motor that hums without turning
  • Washer will not spin, or clothes come out soaking wet
  • Washer will not start or the lid or door stays locked
  • Water on the floor under or in front of the washer

Why Washing Machines Break Down

Lid switches and door locksA washer will not fill, agitate or spin unless the lid switch or door lock tells the control the lid or door is shut and locked. A worn switch or failed lock is one of the most common parts replaced.
Belts, couplers and motorsDepending on the design, the motor turns the drum through a belt, a motor coupling or a direct-drive rotor. A worn belt, broken coupler or failed motor leaves the drum still while the washer hums or fills.
Suspension and bearingsShock absorbers, dampers and springs hold the tub steady during the spin. When they wear, the washer bangs and walks. Worn drum bearings make a rumbling or grinding noise that gets louder on the spin cycle.

What Gets Fixed on a Garner Washer Call

Door boot and leaksOn front loaders the rubber door boot can tear or hold water and debris. A technician follows any leak back to its source, which may be the boot, a hose clamp, the pump, the inlet valve or the tub.
Tub bearings and sealA rumble or roar that gets louder as the drum speeds up usually means worn bearings, often after a tub seal has let water reach them. It is one of the bigger repairs, so the technician will compare it with the washer's age and value.
Controls and error codesElectronic washers report faults with codes. The technician reads the code and runs the brand's test mode where there is one, then checks wiring and the control board before ordering it, since boards are among the costlier parts.

Troubleshooting first? Start with washer not draining or washer smells like mildew.

Leaks and Safe Shutoff

Whirlpool recommends replacing washer fill hoses every five years to lower the risk of a hose failing and leaking. Source: Whirlpool - Washing Machine Fill Hoses

Plug the washer into a grounded three-prong outlet on a 15- or 20-amp 120-volt circuit, and never remove the ground prong or use an adapter or extension cord. Source: Whirlpool - Washer Installation Instructions

Do not make an airtight seal between the drain hose and the standpipe or restrict the hose; standpipe height limits vary by model (Maytag's high-efficiency guide allows 18 to 96 inches). Source: Maytag - High-Efficiency Washer Installation Instructions

More: where washer leaks come from.

What Washer Repair Costs in Garner

A washer repair is usually a single part plus labor. Reference ranges from published cost guides:

50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Local Notes for Garner

Most washer calls in Garner come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

North Carolina has no license specific to appliance repair; work on gas appliances, fuel piping and heating equipment is regulated by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors, with an exemption for minor repairs that don't change fuel type, venting or piping. Source: N.C. Gen. Stat. ยง 87-21 (NC General Assembly)

In North Carolina, you can check a license with the NC Plumbing, Heating and Fire Sprinkler Board public license search or report a problem to the North Carolina Department of Justice, Consumer Protection Division.

Before You Book in Garner

  • Do you work on front-load and top-load washers, or only one type?
  • If the washer is leaking, will you find where the water starts before quoting a part?
  • Can you give a written estimate before ordering parts?

Washing Machine Repair FAQs: Garner, NC

Is there anything I can try first?
Make sure the washer is plugged in and the outlet works, the lid or door closes fully, and both water valves are open. If the washer is leaking, unplug it and turn off both supply valves before doing anything else.
Why is my washer so loud on the spin cycle?
An unbalanced load is the most common cause, followed by a washer that is not level. If it keeps happening with balanced loads on a level floor, worn shock absorbers, suspension springs or drum bearings are the likely cause, and a technician should check them.
How do I get rid of a washer mildew smell?
Residue from detergent and fabric softener collects in the door boot, the dispenser and the drum. Wipe the boot, clean the dispenser, run the washer's cleaning cycle or a hot empty cycle, and leave the door open between loads.

Brand-Specific Washer Repair, Garner

Washing Machine Repair in Nearby Cities

Write down the model and serial number from the label (inside the lid or door frame, or on the back of the cabinet) and note any error code. It saves a Garner technician a trip for parts.

Skip the calling around: we will find a washer tech for you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech