If your Maytag washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. We flag companies whose listing or website mentions Maytag and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Maytag Washers Near Garner
Our data shows 40 appliance repair companies inside a 30-mile radius of Garner. 2 list an address in Garner, and the rest are spread across Raleigh (19), Cary (6), and Fuquay-Varina (4). Nearest on the list: Ark Appliance Repair Service LLC., around 1.5 miles out. None of the repair companies near Garner name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Rated companies nearby average 4.2 stars across 38 businesses.
Companies are shown by relevance and distance from Garner. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Listing Saturday hours | 33 |
|---|---|
| Name washers or washing machines in their listing | 9 |
| Rated 4.5 stars or higher (10+ reviews) | 24 |
| Companies within 30 miles | 60 |
| Mention Maytag | 0 |
| Three nearest companies, miles away | 1.5, 4.4, 4.8 |
First up for Garner: Mr. Appliance of Cary (10.6 miles away, based in Cary, 4.9 stars from 1,970 reviews, lists Saturday hours); One Source Appliance Repair (14.2 miles away, based in Raleigh, 4.6 stars from 135 reviews); The Appliance Service Center of Raleigh (6.8 miles away, based in Raleigh, 4.1 stars from 100 reviews, lists Saturday hours); Sears Appliance Repair (12.2 miles away, based in Raleigh, 4.3 stars from 571 reviews, lists Saturday hours).
Maytag sells top-load agitator, top-load impeller, and front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Maytag Washer Lines and Features
What a Maytag Washer Technician Deals With
The washer will only run and spin when the lid or door switch senses it is fully closed, and the lid or door locks at the start of a cycle. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
Common Maytag Washer Problems
- Washer odor. Maytag links odor to skipped cleanings, wet loads left sitting and too much detergent or softener, and recommends regular washer cleaning and moving loads out promptly. Source: Maytag - How to repair a washing machine (top load)
- Lid or door won't lock. For lid or door lock codes, Maytag says to check for clothing or objects blocking the latch area and then reset the washer by unplugging it for five minutes. Source: Maytag Product Help - F5E2 - Error Code (top load)
Maytag Washer Error Codes
| Code | What it means |
|---|---|
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
Signs Your Maytag Washer Needs a Technician
- Water on the floor under or in front of the washer
- Musty or mildew smell from the drum or door seal
- Washer fills slowly, will not fill, or keeps filling
How a Washer Service Call Usually Goes in Garner
Owner Care for Maytag Washers
- Run the Clean Washer cycle with a washer cleaning tablet about once a month, or when the clean washer light comes on or odor appears; without that cycle, use the hottest, highest water setting. Source: Maytag Product Help - Cleaning Washers with affresh
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Maytag Washer Repair Cost Ranges
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Where the washer drains (standpipe or laundry sink)
- How old the washer is
- Any error code shown on the display
Laundry Notes for Garner, NC
Most washer calls in Garner come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
North Carolina has no license specific to appliance repair; work on gas appliances, fuel piping and heating equipment is regulated by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors, with an exemption for minor repairs that don't change fuel type, venting or piping. Source: N.C. Gen. Stat. ยง 87-21 (NC General Assembly)
In North Carolina, you can check a license with the NC Plumbing, Heating and Fire Sprinkler Board public license search or report a problem to the North Carolina Department of Justice, Consumer Protection Division.
Before You Book in Garner
- If a part has to be ordered, how soon can you come back to finish?
- What guarantee do you give on parts and labor?
- If the washer is leaking, will you find where the water starts before quoting a part?
Maytag Washer Repair FAQs: Garner, NC
Why does my front-load washer smell?
What should I do about a Maytag error code?
Which Garner technicians work on Maytag?
Do you work for Maytag?
Other Washer Repair in Garner
Maytag Washer Repair in Nearby Cities
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.