Most Maytag washer repairs in Wendell involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. We flag companies whose listing or website mentions Maytag and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Maytag Washers Near Wendell
Within 30 miles of Wendell there are 40 appliance repair companies in our data. 3 of them are based in Wendell itself, and the rest are spread across Raleigh (20), Wake Forest (3), and Clayton (2). The farthest listed company is about 22 miles out. Nearest on the list: Swift Appliance Repair Organizers, around 1.7 miles out. None of the repair companies near Wendell name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Rated companies nearby average 4.2 stars across 40 businesses.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Mention Maytag | 0 |
|---|---|
| Mention washer work | 9 |
| Repair companies inside 30 miles | 60 |
| With 4.5+ stars and at least 10 reviews | 21 |
| Listing Saturday hours | 33 |
| Three nearest companies, miles away | 1.7, 2.6, 6.3 |
First up for Wendell: Mr. Appliance of Cary (21.8 miles away, based in Cary, 4.9 stars from 1,970 reviews, lists Saturday hours); One Source Appliance Repair (16.4 miles away, based in Raleigh, 4.6 stars from 135 reviews); Sears Appliance Repair (11.7 miles away, based in Raleigh, 4.3 stars from 571 reviews, lists Saturday hours); The Appliance Service Center of Raleigh (14.2 miles away, based in Raleigh, 4.1 stars from 100 reviews, lists Saturday hours).
Maytag sells top-load agitator, top-load impeller, and front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Maytag Washer Lines Technicians Work On
What a Maytag Washer Technician Deals With
Top load HE models use auto-sensing, spinning slowly to estimate the load before adding water in stages, so the water level can look lower than owners expect. Source: Maytag Product Help - Auto Sensing in a Top Load HE Washer
Common Maytag Washer Problems
- Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving
- Washer not filling. Maytag says to make sure both faucets are fully open, the inlet hoses are not kinked, and the inlet screens on the water valve are not clogged. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Maytag Washer Error Codes
| Code | What it means |
|---|---|
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
When to Call for Maytag Washer Repair
- Washer will not spin, or clothes come out soaking wet
- Washer will not start or the lid or door stays locked
- Musty or mildew smell from the drum or door seal
Inside a Washer Repair Visit
Owner Care for Maytag Washers
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
What Maytag Washer Repairs Cost
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Any error code shown on the display
- Where the washer drains (standpipe or laundry sink)
- How old the washer is
Laundry Notes for Wendell, NC
Most washer calls in Wendell come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
North Carolina has no license specific to appliance repair; work on gas appliances, fuel piping and heating equipment is regulated by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors, with an exemption for minor repairs that don't change fuel type, venting or piping. Source: N.C. Gen. Stat. ยง 87-21 (NC General Assembly)
In North Carolina, you can check a license with the NC Plumbing, Heating and Fire Sprinkler Board public license search or report a problem to the North Carolina Department of Justice, Consumer Protection Division.
How to Choose a Washing Machine Technician Near Wendell
- What guarantee do you give on parts and labor?
- Can you give a written estimate before ordering parts?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
Maytag Washer Repair FAQs: Wendell, NC
What should I do about a Maytag error code?
Where is the water under my washer coming from?
Should I repair or replace my Maytag washer?
How do I get rid of a washer mildew smell?
More Washing Machine Repair in Wendell, NC
More Maytag Washer Repair Pages Nearby
Before you call, find the model and serial number on your Maytag washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.