Most Maytag washer repairs in Jackson involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Jackson list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Maytag. If your washer is still under manufacturer coverage, contact Maytag directly.
Maytag Washer Repair Near Jackson
6 repair companies serve Jackson from within 60 miles. Other nearby bases include Rexburg (2), Rigby (2), and Alpine (1). Pro Appliance Service LLC is the nearest, roughly 24.6 miles from Jackson. None of the repair companies near Jackson name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Across 5 rated companies, the average public rating is 4.7 stars. Jackson is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Companies are shown by relevance and distance from Jackson. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Three nearest companies, miles away | 24.6, 39.4, 55.6 |
|---|---|
| Mention Maytag | 0 |
| Name washers or washing machines in their listing | 1 |
| With 4.5+ stars and at least 10 reviews | 1 |
| Repair companies inside 60 miles | 6 |
| Open on Saturdays (per listing) | 1 |
Closest matches for Jackson: Making Mends Appliance Repair & Rentals (56.2 miles away, based in Rexburg, 4.9 stars from 59 reviews); Pro Appliance Service LLC (24.6 miles away, based in Alpine, 5.0 stars from 9 reviews); Walker Appliance & Refrigeration (55.6 miles away, based in Rexburg, 4.4 stars from 47 reviews); Tri-C Appliance (39.4 miles away, based in Thayne).
Maytag sells top-load agitator, top-load impeller, and front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Maytag Washer Lines and Features
What a Maytag Washer Technician Deals With
Top load HE models use auto-sensing, spinning slowly to estimate the load before adding water in stages, so the water level can look lower than owners expect. Source: Maytag Product Help - Auto Sensing in a Top Load HE Washer
Common Maytag Washer Problems
- Washer not filling. Maytag says to make sure both faucets are fully open, the inlet hoses are not kinked, and the inlet screens on the water valve are not clogged. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- Washer odor. Maytag links odor to skipped cleanings, wet loads left sitting and too much detergent or softener, and recommends regular washer cleaning and moving loads out promptly. Source: Maytag - How to repair a washing machine (top load)
Maytag Washer Error Codes
| Code | What it means |
|---|---|
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
When to Call for Maytag Washer Repair
- Burning smell or a motor that hums without turning
- Washer fills slowly, will not fill, or keeps filling
- Musty or mildew smell from the drum or door seal
What a Washing Machine Technician Checks
Keeping a Maytag Washer Running
- Use only HE detergent in HE washers and measure it per the detergent maker's directions, since too much causes oversudsing, poor rinsing and residue. Source: Maytag Product Help - HE Detergent use in a Washer
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
What Maytag Washer Repairs Cost
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Any error code shown on the display
- How old the washer is
Local Notes for Jackson
Most washer calls in Jackson come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
The Wyoming State Fire Marshal licenses electricians, electrical contractors and limited technicians (including an HVAC category), and its licensing page lists no appliance repair license. Source: Wyoming State Fire Marshal: Electrical Licensing
In Wyoming, you can check a license with the Wyoming State Fire Marshal Public Portal (electrical licensing) or report a problem to the Wyoming Attorney General, Consumer Protection and Antitrust Unit.
How to Choose a Washing Machine Technician Near Jackson
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- What is the service call or diagnostic fee, and is it applied to the repair?
- If the washer is leaking, will you find where the water starts before quoting a part?
Maytag Washer Repair FAQs: Jackson, WY
Why is my washer leaking?
Why does my Maytag washer show an error code?
How do I get rid of a washer mildew smell?
How do I find a technician who knows Maytag washers?
Related Repair Pages for Jackson
Maytag Washer Repair Near Jackson
Write down any error code your Maytag washer shows and at what point in the cycle it appears. It helps a Jackson technician bring the right parts.