Most Maytag washer repairs in Blackfoot involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Blackfoot list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Maytag Washers Near Blackfoot
Within 60 miles of Blackfoot there are 16 appliance repair companies in our data. 3 of them are based in Blackfoot itself, and the rest are spread across Idaho Falls (4), Pocatello (3), and Rexburg (3). Nearest on the list: David Clark Refrigeration., around 0.3 miles out. No company within 90 miles of Blackfoot mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 4.4 stars across 16 businesses. Blackfoot is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Companies within 60 miles | 16 |
|---|---|
| Open on Saturdays (per listing) | 9 |
| Three nearest companies, miles away | 0.3, 5.3, 12.7 |
| Name washers or washing machines in their listing | 4 |
| Mention Maytag | 0 |
| Rated 4.5 stars or higher (10+ reviews) | 10 |
The leading options for Blackfoot are Steven's Appliance Services (5.3 miles away, 5.0 stars from 292 reviews); Sears Appliance Repair (26.7 miles away, based in Idaho Falls, 4.7 stars from 209 reviews, lists Saturday hours); Sarah's Appliance Repair LLC (25.8 miles away, based in Idaho Falls, 4.8 stars from 106 reviews, lists Saturday hours); Sears Appliance Repair (22.4 miles away, based in Pocatello, 4.7 stars from 38 reviews, lists Saturday hours).
Know which Maytag washer you have before you call. Maytag makes top-load agitator, top-load impeller, and front-load models, and the technician will ask.
Maytag Washer Lines Technicians Work On
What a Maytag Washer Technician Deals With
The washer will only run and spin when the lid or door switch senses it is fully closed, and the lid or door locks at the start of a cycle. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
Common Maytag Washer Problems
- Washer odor. Maytag links odor to skipped cleanings, wet loads left sitting and too much detergent or softener, and recommends regular washer cleaning and moving loads out promptly. Source: Maytag - How to repair a washing machine (top load)
- Lid or door won't lock. For lid or door lock codes, Maytag says to check for clothing or objects blocking the latch area and then reset the washer by unplugging it for five minutes. Source: Maytag Product Help - F5E2 - Error Code (top load)
What Maytag Washer Codes Mean
| Code | What it means |
|---|---|
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
When to Call for Maytag Washer Repair
- Water on the floor under or in front of the washer
- Musty or mildew smell from the drum or door seal
- Grinding or roaring noise that rises with spin speed
Inside a Washer Repair Visit
Owner Care for Maytag Washers
- Run the Clean Washer cycle with a washer cleaning tablet about once a month, or when the clean washer light comes on or odor appears; without that cycle, use the hottest, highest water setting. Source: Maytag Product Help - Cleaning Washers with affresh
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Maytag Washer Repair Cost Ranges
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Any error code shown on the display
- Where the washer drains (standpipe or laundry sink)
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Around Blackfoot
Most washer calls in Blackfoot come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Idaho's Division of Occupational and Professional Licenses does not list appliance repair as a licensed profession; gas piping and gas appliance work falls under the state's HVAC licensing, which includes specialty licenses for those trades. Source: Is My Profession Licensed? - Idaho DOPL
In Idaho, you can check a license with the Idaho DOPL Search for a License or Registration or report a problem to the Idaho Attorney General Consumer Protection Division.
Questions to Ask a Blackfoot Washer Technician
- How often do you repair Maytag washers, and how quickly can you get parts?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- What guarantee do you give on parts and labor?
Maytag Washer Repair FAQs: Blackfoot, ID
Do you work for Maytag?
Which Blackfoot technicians work on Maytag?
Why won't my washer spin?
Is my Maytag washer worth repairing?
More Washing Machine Repair in Blackfoot, ID
More Maytag Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.