If your Maytag washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Santa Clara list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
Washing Machine Repair Near Me is independent and not affiliated with Maytag. Listed companies are independent technicians who repair Maytag washers and other brands.
Who Works on Maytag Washers Near Santa Clara
Within 60 miles of Santa Clara there are 9 appliance repair companies in our data. The rest are spread across St. George (4), Cedar City (2), and Washington (1). Distances run up to about 52 miles. Mr. Appliance of St. George is the nearest, roughly 3.5 miles from Santa Clara. None of the repair companies near Santa Clara name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Rated companies nearby average 4.4 stars across 8 businesses. Santa Clara is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Companies are shown by relevance and distance from Santa Clara. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention washer work | 2 |
|---|---|
| Mention Maytag | 0 |
| Rated 4.5 stars or higher (10+ reviews) | 3 |
| Distance to the three closest (mi) | 3.5, 5.4, 5.6 |
| Listing Saturday hours | 4 |
| Appliance repair companies in range (60 mi) | 9 |
At the top of the Santa Clara list: Mr. Appliance of St. George (3.5 miles away, based in St. George, 4.8 stars from 1,430 reviews, lists Saturday hours); Sears Appliance Repair (6.2 miles away, based in St. George, 4.1 stars from 249 reviews, lists Saturday hours); JJ Service and Repair (9.2 miles away, based in Washington, 4.9 stars from 107 reviews); Appliance Solutions of Utah (5.4 miles away, based in St. George, 3.9 stars from 173 reviews).
Know Your Maytag Washer
What Makes Maytag Washer Repairs Different
Maytag top loaders move clothes with either an agitator or an impeller, and the drive shifts between agitation and full spin, which can make a normal clunking sound. Source: Maytag - How to repair a washing machine (top load)
Maytag Washer Symptoms and First Checks
- Washer leaking. Maytag points first to loose inlet hose connections or missing hose washers, then to the drain hose and a backed-up household drain, and to clothes added mid-cycle that raise the water over the tub. Source: Maytag Product Help - Leaking Water Underneath - Washer
- Lid or door won't lock. For lid or door lock codes, Maytag says to check for clothing or objects blocking the latch area and then reset the washer by unplugging it for five minutes. Source: Maytag Product Help - F5E2 - Error Code (top load)
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
When to Call for Maytag Washer Repair
- Water on the floor under or in front of the washer
- Loud banging, shaking or walking during the spin
- An error code on the display
Inside a Washer Repair Visit
Care Maytag Recommends for Its Washers
- Run the Clean Washer cycle with a washer cleaning tablet about once a month, or when the clean washer light comes on or odor appears; without that cycle, use the hottest, highest water setting. Source: Maytag Product Help - Cleaning Washers with affresh
- On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Budgeting for a Maytag Washer Repair
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Maytag Washer Call
- How old the washer is
- Where the washer drains (standpipe or laundry sink)
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Laundry Notes for Santa Clara, UT
Most washer calls in Santa Clara come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Hiring a Washer Repair Company in Santa Clara
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Will you check the drain pump filter and drain hose before replacing the pump?
- If a part has to be ordered, how soon can you come back to finish?
Maytag Washer Repair FAQs: Santa Clara, UT
How do I get rid of a washer mildew smell?
Do you work for Maytag?
How do I find a technician who knows Maytag washers?
More Washing Machine Repair in Santa Clara, UT
Maytag Washer Repair in Nearby Cities
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.