Maytag owners in Hurricane usually want two things from a repair company: experience with the brand and quick access to parts. The Hurricane list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
Washing Machine Repair Near Me is independent and not affiliated with Maytag. Listed companies are independent technicians who repair Maytag washers and other brands.
Maytag Washer Repair Near Hurricane
Our data shows 9 appliance repair companies inside a 60-mile radius of Hurricane. 1 list an address in Hurricane, and the rest are spread across St. George (4), Cedar City (2), and Washington (1). Distances run up to about 44 miles. Appliance Repair Center is the nearest, roughly 3.9 miles from Hurricane. No company within 90 miles of Hurricane mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 8 rated companies in range average 4.4 stars. Because the nearest shops are farther out, ask each company whether Hurricane is inside its regular service area.
Companies are shown by relevance and distance from Hurricane. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Distance to the three closest (mi) | 3.9, 7.6, 10.9 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 3 |
| Name washers or washing machines in their listing | 2 |
| Mention Maytag | 0 |
| Open on Saturdays (per listing) | 4 |
| Appliance repair companies in range (60 mi) | 9 |
The leading options for Hurricane are Mr. Appliance of St. George (13.6 miles away, based in St. George, 4.8 stars from 1,430 reviews, lists Saturday hours); Sears Appliance Repair (10.9 miles away, based in St. George, 4.1 stars from 249 reviews, lists Saturday hours); JJ Service and Repair (7.6 miles away, based in Washington, 4.9 stars from 107 reviews); Appliance Repair Center (3.9 miles away, 4.9 stars from 74 reviews, lists Saturday hours).
Know Your Maytag Washer
What a Maytag Washer Technician Deals With
Maytag top loaders move clothes with either an agitator or an impeller, and the drive shifts between agitation and full spin, which can make a normal clunking sound. Source: Maytag - How to repair a washing machine (top load)
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
What Maytag Says to Check First
- Washer not filling. Maytag says to make sure both faucets are fully open, the inlet hoses are not kinked, and the inlet screens on the water valve are not clogged. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving
Maytag Washer Error Codes
| Code | What it means |
|---|---|
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
When to Call for Maytag Washer Repair
- Washer will not start or the lid or door stays locked
- Musty or mildew smell from the drum or door seal
- Washer will not spin, or clothes come out soaking wet
What a Washing Machine Technician Checks
Owner Care for Maytag Washers
- Run the Clean Washer cycle with a washer cleaning tablet about once a month, or when the clean washer light comes on or odor appears; without that cycle, use the hottest, highest water setting. Source: Maytag Product Help - Cleaning Washers with affresh
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Budgeting for a Maytag Washer Repair
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- How old the washer is
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Any error code shown on the display
Laundry Notes for Hurricane, UT
Most washer calls in Hurricane come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
How to Choose a Washing Machine Technician Near Hurricane
- Do you work on front-load and top-load washers, or only one type?
- Can you give a written estimate before ordering parts?
- Will you check the drain pump filter and drain hose before replacing the pump?
Maytag Washer Repair FAQs: Hurricane, UT
What should I do about a Maytag error code?
Why won't my washer spin?
How do I get rid of a washer mildew smell?
Why is my washer leaking?
Related Repair Pages for Hurricane
Maytag Washer Repair Near Hurricane
Before you call, find the model and serial number on your Maytag washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.