If your Maytag washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. We flag companies whose listing or website mentions Maytag and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Maytag Washers Near Fruit Heights
Our data shows 40 appliance repair companies inside a 30-mile radius of Fruit Heights. Other nearby bases include Salt Lake City (15), Clearfield (3), and Ogden (3). Distances run up to about 21 miles. Precision Appliance Installs is the nearest, roughly 1.2 miles from Fruit Heights. No company within 90 miles of Fruit Heights mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 4.5 stars across 28 businesses.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Mention Maytag | 0 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 17 |
| Listing Saturday hours | 41 |
| Mention washer work | 4 |
| Three nearest companies, miles away | 1.2, 1.3, 3.1 |
| Repair companies inside 30 miles | 60 |
The leading options for Fruit Heights are Dick Kearsley Service Center (8.0 miles away, based in Clearfield, 4.6 stars from 609 reviews, lists Saturday hours); Famous Appliance Service (11.8 miles away, based in North Salt Lake, 4.7 stars from 510 reviews); Eagle Appliance Repair Of Salt Lake City (9.9 miles away, based in West Bountiful, 5.0 stars from 98 reviews, lists Saturday hours); iFiX, LLC (11.3 miles away, based in Riverdale, 4.9 stars from 436 reviews).
Maytag sells top-load agitator, top-load impeller, and front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Maytag Washer Lines and Features
What a Maytag Washer Technician Deals With
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
Maytag Washer Symptoms and First Checks
- Lid or door won't lock. For lid or door lock codes, Maytag says to check for clothing or objects blocking the latch area and then reset the washer by unplugging it for five minutes. Source: Maytag Product Help - F5E2 - Error Code (top load)
- Washer leaking. Maytag points first to loose inlet hose connections or missing hose washers, then to the drain hose and a backed-up household drain, and to clothes added mid-cycle that raise the water over the tub. Source: Maytag Product Help - Leaking Water Underneath - Washer
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
When to Call for Maytag Washer Repair
- Loud banging, shaking or walking during the spin
- Washer will not start or the lid or door stays locked
- Washer will not spin, or clothes come out soaking wet
What a Washing Machine Technician Checks
Keeping a Maytag Washer Running
- Use only HE detergent in HE washers and measure it per the detergent maker's directions, since too much causes oversudsing, poor rinsing and residue. Source: Maytag Product Help - HE Detergent use in a Washer
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Budgeting for a Maytag Washer Repair
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Any error code shown on the display
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- How old the washer is
Around Fruit Heights
Most washer calls in Fruit Heights come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Before You Book in Fruit Heights
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- How often do you repair Maytag washers, and how quickly can you get parts?
- Will you check the drain pump filter and drain hose before replacing the pump?
Maytag Washer Repair FAQs: Fruit Heights, UT
What stops a washer from spinning?
Why is my washer leaking?
Is this Maytag customer service?
How do I get rid of a washer mildew smell?
Related Repair Pages for Fruit Heights
More Maytag Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.