If your Maytag washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. Below are independent repair companies serving Henderson, with those that mention Maytag first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Maytag Washers Near Henderson
Within 60 miles of Henderson there are 36 appliance repair companies in our data. 1 of them are based in Henderson itself, and the rest are spread across Tyler (7), Longview (5), and Lufkin (4). Distances run up to about 59 miles. None of the repair companies near Henderson name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Nearest on the list: All American Appliance, around 9.0 miles out. Rated companies nearby average 4.1 stars across 33 businesses. Henderson is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Listing Saturday hours | 15 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 13 |
| Repair companies inside 60 miles | 36 |
| Mention Maytag | 0 |
| Three nearest companies, miles away | 9.0, 15.7, 21.6 |
| Name washers or washing machines in their listing | 9 |
The leading options for Henderson are Mr. Appliance of East Texas (33.4 miles away, based in Tyler, 4.7 stars from 1,263 reviews); Sears Appliance Repair (26.5 miles away, based in Longview, 4.5 stars from 206 reviews, lists Saturday hours); Bulldawg Appliance Repair (26.1 miles away, based in Carthage, 3.9 stars from 50 reviews); Sears Appliance Repair (30.9 miles away, based in Jacksonville, 3.8 stars from 80 reviews, lists Saturday hours).
Know which Maytag washer you have before you call. Maytag makes top-load agitator, top-load impeller, and front-load models, and the technician will ask.
Know Your Maytag Washer
What a Maytag Washer Technician Deals With
Maytag top loaders move clothes with either an agitator or an impeller, and the drive shifts between agitation and full spin, which can make a normal clunking sound. Source: Maytag - How to repair a washing machine (top load)
Common Maytag Washer Problems
- Washer leaking. Maytag points first to loose inlet hose connections or missing hose washers, then to the drain hose and a backed-up household drain, and to clothes added mid-cycle that raise the water over the tub. Source: Maytag Product Help - Leaking Water Underneath - Washer
- Washer odor. Maytag links odor to skipped cleanings, wet loads left sitting and too much detergent or softener, and recommends regular washer cleaning and moving loads out promptly. Source: Maytag - How to repair a washing machine (top load)
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
Maytag Washer Problems Worth a Service Call
- Water on the floor under or in front of the washer
- Washer fills slowly, will not fill, or keeps filling
- Burning smell or a motor that hums without turning
Inside a Washer Repair Visit
Owner Care for Maytag Washers
- Use only HE detergent in HE washers and measure it per the detergent maker's directions, since too much causes oversudsing, poor rinsing and residue. Source: Maytag Product Help - HE Detergent use in a Washer
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
What Maytag Washer Repairs Cost
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Maytag Washer Call
- How old the washer is
- Where the washer drains (standpipe or laundry sink)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Local Notes for Henderson
Most washer calls in Henderson come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Hiring a Washer Repair Company in Henderson
- Is your company licensed where my state requires it, and insured?
- Can you give a written estimate before ordering parts?
- Do you work on front-load and top-load washers, or only one type?
Maytag Washer Repair FAQs: Henderson, TX
Do you work for Maytag?
Where is the water under my washer coming from?
Why does my Maytag washer show an error code?
Is my Maytag washer worth repairing?
More Washing Machine Repair in Henderson, TX
More Maytag Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.