Whirlpool owners in Henderson usually want two things from a repair company: experience with the brand and quick access to parts. We flag companies whose listing or website mentions Whirlpool and fill in with nearby appliance repair companies so you always have options.
Washing Machine Repair Near Me is independent and not affiliated with Whirlpool. Listed companies are independent technicians who repair Whirlpool washers and other brands.
Who Works on Whirlpool Washers Near Henderson
36 repair companies serve Henderson from within 60 miles. 1 list an address in Henderson, and the rest are spread across Tyler (7), Longview (5), and Lufkin (4). Distances run up to about 59 miles. All American Appliance is the nearest, roughly 9.0 miles from Henderson. Of those, 1 mentions Whirlpool by name. The 33 rated companies in range average 4.1 stars. Henderson is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Companies are shown by relevance and distance from Henderson. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention Whirlpool | 1 |
|---|---|
| Repair companies inside 60 miles | 36 |
| With 4.5+ stars and at least 10 reviews | 13 |
| Mention washer work | 9 |
| Three nearest companies, miles away | 9.0, 15.7, 21.6 |
| Listing Saturday hours | 15 |
At the top of the Henderson list: Mr. Appliance of East Texas (33.4 miles away, based in Tyler, 4.7 stars from 1,263 reviews); Sears Appliance Repair (26.5 miles away, based in Longview, 4.5 stars from 206 reviews, lists Saturday hours); Bulldawg Appliance Repair (26.1 miles away, based in Carthage, 3.9 stars from 50 reviews); Raney Appliance Service (36.3 miles away, based in Tyler, 4.5 stars from 57 reviews).
Whirlpool sells top-load agitator, top-load impeller, front-load, all-in-one combo, and commercial washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Whirlpool Washer Lines and Features
What a Whirlpool Washer Technician Deals With
The drain hose must run to a standpipe between 30 and 96 inches tall, since a higher drain can let water flow back into the washer. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
What Whirlpool Says to Check First
- Washer leaking. Check that the inlet hoses have their rubber washers and snug connections at both ends, then make sure the drain hose is secure and the house drain is not backing up. Source: Whirlpool - Leaking Water Underneath - Washer
- Washer not spinning. Redistribute an unbalanced or overloaded load, cut back on detergent to avoid excess suds, and remember delicate cycles spin slowly. Source: Whirlpool - Front Load Washer is not Draining, not Spinning, or Leaving Wet Loads
What Whirlpool Washer Codes Mean
| Code | What it means |
|---|---|
| Sud / Sd | Too many suds were detected, usually from non-HE or too much detergent. Source: Whirlpool - Error Codes in Front Load Washers |
| F8 E2 | Dispenser system problem on select models, often a clogged detergent drawer or cartridge. Source: Whirlpool - Error Codes in Front Load Washers |
| Int | The cycle was paused or canceled, and the washer may drain and spin for a while before it stops. Source: Whirlpool - Error Codes in Front Load Washers |
When to Call for Whirlpool Washer Repair
- Burning smell or a motor that hums without turning
- Water on the floor under or in front of the washer
- Musty or mildew smell from the drum or door seal
Inside a Washer Repair Visit
Owner Care for Whirlpool Washers
- Clean the front load drain pump filter every few months or whenever lint builds up, on models that have one. Source: Whirlpool - Cleaning the Pump Filter - Front Load Washer
- Replace the water fill hoses about every five years. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
What Whirlpool Washer Repairs Cost
Price the repair before replacing a Whirlpool washer. Published ranges for common jobs:
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Any error code shown on the display
- Where the washer drains (standpipe or laundry sink)
Local Notes for Henderson
Most washer calls in Henderson come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Hiring a Washer Repair Company in Henderson
- If the washer is leaking, will you find where the water starts before quoting a part?
- If a part has to be ordered, how soon can you come back to finish?
- Do you work on front-load and top-load washers, or only one type?
Whirlpool Washer Repair FAQs: Henderson, TX
What should I do about a Whirlpool error code?
Which Henderson technicians work on Whirlpool?
Is my Whirlpool washer worth repairing?
What stops a washer from spinning?
Other Washer Repair in Henderson
Whirlpool Washer Repair Near Henderson
Before you call, find the model and serial number on your Whirlpool washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.