Most Kenmore washer repairs in Henderson involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Henderson, with those that mention Kenmore first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Kenmore, and the technicians listed are independent repair companies, not the manufacturer.
Kenmore appliances were sold through Sears for decades, so many owners look for Sears washer repair. The companies here are independent technicians who work on Kenmore and Kenmore Elite washers; they are not Sears.
Independent Kenmore Washer Technicians, Henderson TX
Our data shows 36 appliance repair companies inside a 60-mile radius of Henderson. 1 list an address in Henderson, and other nearby bases include Tyler (7), Longview (5), and Lufkin (4). Distances run up to about 59 miles. The closest is All American Appliance, about 9.0 miles away. 1 of them mentions Kenmore in their listing or website. The 33 rated companies in range average 4.1 stars. Henderson is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Listing Saturday hours | 15 |
|---|---|
| Mention Kenmore | 1 |
| Mention washer work | 9 |
| Repair companies inside 60 miles | 36 |
| Rated 4.5 stars or higher (10+ reviews) | 13 |
| Distance to the three closest (mi) | 9.0, 15.7, 21.6 |
Closest matches for Henderson: Mr. Appliance of East Texas (33.4 miles away, based in Tyler, 4.7 stars from 1,263 reviews); Sears Appliance Repair (26.5 miles away, based in Longview, 4.5 stars from 206 reviews, lists Saturday hours); Raney Appliance Service (36.3 miles away, based in Tyler, 4.5 stars from 57 reviews); Sears Appliance Repair (30.9 miles away, based in Jacksonville, 3.8 stars from 80 reviews, lists Saturday hours).
Kenmore Washer Lines and Features
How Kenmore Washers Are Built
Sensor-equipped models estimate load size and soil level and adjust water and detergent to match. Source: Kenmore - 5 things you didn't know a Kenmore smart washer and dryer could do
When to Call for Kenmore Washer Repair
- Washer fills slowly, will not fill, or keeps filling
- Washer will not start or the lid or door stays locked
- An error code on the display
Inside a Washer Repair Visit
Keeping a Kenmore Washer Running
- Check the hoses behind the washer regularly for cracks, bulges or drips, and replace them about every five years. Source: Kenmore - Appliance Maintenance Tips to Help Maximize Efficiency
- Every few months, run the empty washer on hot water with two cups of white vinegar to clear detergent residue and grime. Source: Kenmore - Appliance Maintenance Tips to Help Maximize Efficiency
Brand guides: Kenmore Washer Not Draining or Spinning: Fixes.
What Kenmore Washer Repairs Cost
Most Kenmore washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Kenmore Washer Call
- Any error code shown on the display
- How old the washer is
- Where the washer drains (standpipe or laundry sink)
Around Henderson
Most washer calls in Henderson come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
How to Choose a Washing Machine Technician Near Henderson
- Is your company licensed where my state requires it, and insured?
- Do you work on front-load and top-load washers, or only one type?
- How often do you repair Kenmore washers, and how quickly can you get parts?
Kenmore Washer Repair FAQs: Henderson, TX
Do you work for Kenmore?
Why is my washer leaking?
Why does my Kenmore washer show an error code?
More Washing Machine Repair in Henderson, TX
More Kenmore Washer Repair Pages Nearby
Write down any error code your Kenmore washer shows and at what point in the cycle it appears. It helps a Henderson technician bring the right parts.