A Maytag washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. The Jacksonville list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
Washing Machine Repair Near Me is independent and not affiliated with Maytag. Listed companies are independent technicians who repair Maytag washers and other brands.
Independent Maytag Washer Technicians, Jacksonville TX
15 repair companies serve Jacksonville from within 30 miles. 3 of them are based in Jacksonville itself, and other nearby bases include Tyler (7), Chandler (2), and Henderson (1). Distances run up to about 29 miles. No company within 90 miles of Jacksonville mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Shug's Appliance Parts and Services LLC is the nearest, roughly 1.0 miles from Jacksonville. The 13 rated companies in range average 4.2 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| With 4.5+ stars and at least 10 reviews | 7 |
|---|---|
| Repair companies inside 30 miles | 15 |
| Distance to the three closest (mi) | 1.0, 1.1, 3.5 |
| Listing Saturday hours | 5 |
| Mention washer work | 5 |
| Mention Maytag | 0 |
At the top of the Jacksonville list: Mr. Appliance of East Texas (24.3 miles away, based in Tyler, 4.7 stars from 1,263 reviews); Sears Appliance Repair (1.1 miles away, 3.8 stars from 80 reviews, lists Saturday hours); Sears Appliance Repair (25.6 miles away, based in Palestine, 4.5 stars from 139 reviews, lists Saturday hours); Sears Appliance Repair (23.2 miles away, based in Tyler, 3.4 stars from 29 reviews, lists Saturday hours).
Maytag sells top-load agitator, top-load impeller, and front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Maytag Washer Lines Technicians Work On
What a Maytag Washer Technician Deals With
Top load HE models use auto-sensing, spinning slowly to estimate the load before adding water in stages, so the water level can look lower than owners expect. Source: Maytag Product Help - Auto Sensing in a Top Load HE Washer
Common Maytag Washer Problems
- Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving
- Washer leaking. Maytag points first to loose inlet hose connections or missing hose washers, then to the drain hose and a backed-up household drain, and to clothes added mid-cycle that raise the water over the tub. Source: Maytag Product Help - Leaking Water Underneath - Washer
What Maytag Washer Codes Mean
| Code | What it means |
|---|---|
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
When to Call for Maytag Washer Repair
- Washer will not spin, or clothes come out soaking wet
- Water on the floor under or in front of the washer
- Water left in the drum after the cycle
Inside a Washer Repair Visit
Keeping a Maytag Washer Running
- Use only HE detergent in HE washers and measure it per the detergent maker's directions, since too much causes oversudsing, poor rinsing and residue. Source: Maytag Product Help - HE Detergent use in a Washer
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
What Maytag Washer Repairs Cost
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- How old the washer is
- Where the washer drains (standpipe or laundry sink)
- Any error code shown on the display
Laundry Notes for Jacksonville, TX
Most washer calls in Jacksonville come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
How to Choose a Washing Machine Technician Near Jacksonville
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Do you work on front-load and top-load washers, or only one type?
- If a part has to be ordered, how soon can you come back to finish?
Maytag Washer Repair FAQs: Jacksonville, TX
How do I get rid of a washer mildew smell?
Why won't my washer spin?
Is this Maytag customer service?
Where is the water under my washer coming from?
More Washing Machine Repair in Jacksonville, TX
Maytag Washer Repair Near Jacksonville
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.