Most GE washer repairs in Jacksonville involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Jacksonville, with those that mention GE first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
GE Washer Repair Near Jacksonville
We found 15 appliance repair companies within 30 miles of Jacksonville. 3 list an address in Jacksonville, and the rest are spread across Tyler (7), Chandler (2), and Henderson (1). The farthest listed company is about 29 miles out. Shug's Appliance Parts and Services LLC is the nearest, roughly 1.0 miles from Jacksonville. No company within 90 miles of Jacksonville mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Across 13 rated companies, the average public rating is 4.2 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention GE | 0 |
|---|---|
| Three nearest companies, miles away | 1.0, 1.1, 3.5 |
| Appliance repair companies in range (30 mi) | 15 |
| Open on Saturdays (per listing) | 5 |
| With 4.5+ stars and at least 10 reviews | 7 |
| Mention washer work | 5 |
Closest matches for Jacksonville: Mr. Appliance of East Texas (24.3 miles away, based in Tyler, 4.7 stars from 1,263 reviews); Sears Appliance Repair (1.1 miles away, 3.8 stars from 80 reviews, lists Saturday hours); Raney Appliance Service (25.5 miles away, based in Tyler, 4.5 stars from 57 reviews); Sears Appliance Repair (25.6 miles away, based in Palestine, 4.5 stars from 139 reviews, lists Saturday hours).
GE Washer Lines Technicians Work On
How GE Washers Are Built
Electronic models sense load size and type before and during fill, and they detect an out-of-balance load and try to redistribute it, which can keep the spin from reaching full speed. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
On electronic top load models the lid locks automatically during parts of the cycle and stays locked until the basket has coasted to a full stop. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
GE Washer Symptoms and First Checks
- Washer off balance or shaking. Remove some items from an overfilled basket or spread bunched items evenly, then make sure the washer is level. Source: GE Appliances - Frequently Asked Questions About GE Washers
- Washer not filling. Check the breaker and plug, make sure both water faucets are fully open, and look for clogged inlet hose screens. Source: GE Appliances - Top Load Washer - No Fill
Reading a GE Washer Error Code
| Code | What it means |
|---|---|
| dE / E2 | The lid was opened during the cycle; close it and press Start to resume. Source: GE Appliances - Washer - Consumer Help Indicator |
| CAnCELEd | The cycle was paused for more than a day or was stopped by certain errors. Source: GE Appliances - Washer - Consumer Help Indicator |
| FE | Water has reached a critical level; shut off water and power and call for service. Source: GE Appliances - Washer - Consumer Help Indicator |
GE Washer Problems Worth a Service Call
- Washer fills slowly, will not fill, or keeps filling
- Water on the floor under or in front of the washer
- Musty or mildew smell from the drum or door seal
Inside a Washer Repair Visit
Owner Care for GE Washers
- Wipe the front load door gasket, including its folds and edge, after each wash to remove soil and soap residue. Source: GE Appliances - Front Load Washer - Leaking Water
- Leave a top load lid up when the washer is not in use so the inside can dry out. Source: GE Appliances - Frequently Asked Questions About GE Washers
Brand guides: GE Washer Not Draining or Spinning: What to Check.
What GE Washer Repairs Cost
A GE washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- How old the washer is
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Local Notes for Jacksonville
Most washer calls in Jacksonville come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Before You Book in Jacksonville
- If the washer is leaking, will you find where the water starts before quoting a part?
- If a part has to be ordered, how soon can you come back to finish?
- How often do you repair GE washers, and how quickly can you get parts?
GE Washer Repair FAQs: Jacksonville, TX
Where is the water under my washer coming from?
How do I find a technician who knows GE washers?
Is my GE washer worth repairing?
Why does my front-load washer smell?
Other Washer Repair in Jacksonville
GE Washer Repair in Nearby Cities
Before you call, find the model and serial number on your GE washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.