Most Maytag washer repairs in Aztec involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Aztec, with those that mention Maytag first, then the nearest appliance repair companies.
Washing Machine Repair Near Me is independent and not affiliated with Maytag. Listed companies are independent technicians who repair Maytag washers and other brands.
Independent Maytag Washer Technicians, Aztec NM
Within 60 miles of Aztec there are 13 appliance repair companies in our data. Other nearby bases include Durango (6), Farmington (3), and Pagosa Springs (2). The closest is Sears Appliance Repair, about 10.1 miles away. None of the repair companies near Aztec name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Across 12 rated companies, the average public rating is 4.3 stars. Because the nearest shops are farther out, ask each company whether Aztec is inside its regular service area.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Rated 4.5 stars or higher (10+ reviews) | 6 |
|---|---|
| Mention washer work | 4 |
| Listing Saturday hours | 8 |
| Companies within 60 miles | 13 |
| Three nearest companies, miles away | 10.1, 12.6, 14.5 |
| Mention Maytag | 0 |
Closest matches for Aztec: Sears Appliance Repair (10.1 miles away, based in Farmington, 3.3 stars from 49 reviews, lists Saturday hours); Sears Appliance Repair (29.9 miles away, based in Durango, 5.0 stars from 3 reviews, lists Saturday hours); Star Tech Appliance LLC. (12.6 miles away, based in Farmington, 4.3 stars from 17 reviews, lists Saturday hours); Appliance Service Co.. (14.5 miles away, based in Farmington, 4.5 stars from 15 reviews).
Maytag Washer Lines and Features
What a Maytag Washer Technician Deals With
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
Common Maytag Washer Problems
- Washer leaking. Maytag points first to loose inlet hose connections or missing hose washers, then to the drain hose and a backed-up household drain, and to clothes added mid-cycle that raise the water over the tub. Source: Maytag Product Help - Leaking Water Underneath - Washer
- Lid or door won't lock. For lid or door lock codes, Maytag says to check for clothing or objects blocking the latch area and then reset the washer by unplugging it for five minutes. Source: Maytag Product Help - F5E2 - Error Code (top load)
Maytag Washer Error Codes
| Code | What it means |
|---|---|
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
Maytag Washer Problems Worth a Service Call
- Burning smell or a motor that hums without turning
- Grinding or roaring noise that rises with spin speed
- Washer fills slowly, will not fill, or keeps filling
How a Washer Service Call Usually Goes in Aztec
Care Maytag Recommends for Its Washers
- On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
What Maytag Washer Repairs Cost
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Where the washer drains (standpipe or laundry sink)
Local Notes for Aztec
Most washer calls in Aztec come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
New Mexico has no appliance-repair-only license; installing, repairing and servicing natural gas piping and listed gas appliances falls under the Construction Industries Division's MM-2 natural gas fitting classification. Source: CID License Classifications and Scopes (City of Albuquerque)
In New Mexico, you can check a license with the NM Regulation and Licensing Department, Construction Industries: Verify a License or report a problem to the New Mexico Department of Justice (Attorney General), Consumer Protection.
Questions to Ask a Aztec Washer Technician
- If a part has to be ordered, how soon can you come back to finish?
- What is the service call or diagnostic fee, and is it applied to the repair?
- Will you check the drain pump filter and drain hose before replacing the pump?
Maytag Washer Repair FAQs: Aztec, NM
Why does my Maytag washer show an error code?
Why is my washer leaking?
How do I get rid of a washer mildew smell?
What stops a washer from spinning?
Related Repair Pages for Aztec
Maytag Washer Repair Near Aztec
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.