Serving Gallup, New Mexico and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Maytag Washer Repair in Gallup, NM

A local list of independent Maytag washing machine technicians for Gallup and the McKinley County area, plus a helpline that connects you with one.

Talk to a Maytag washer tech in Gallup
Tell us the model and the problem and we will connect you with a local technician.
☎(866) 293-4411
✓6 companies listed for Gallup✓Independent, not a manufacturer✓Public ratings & distances

A Maytag washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. Below are independent repair companies serving Gallup, with those that mention Maytag first, then the nearest appliance repair companies.

This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.

Independent Maytag Washer Technicians, Gallup NM

6 repair companies serve Gallup from within 93 miles. 1 of them are based in Gallup itself, and other nearby bases include Farmington (3), Grants (1), and Holbrook (1). Distances run up to about 92 miles. The closest is TruFix Appliance & Mobile Home Supplies, about 0.2 miles away. No company within 90 miles of Gallup mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 4.4 stars across 6 businesses. Gallup is a smaller market, so expect a longer drive and ask whether a trip charge applies.

Appliance Repair
TruFix Appliance & Mobile Home Supplies
1506 S 2nd St, Gallup, NM 87301
0.2 mi from Gallup
★★★★★ 5.0 (1 review)
Saturday hours
Appliance Repair
Lopez Appliance Repair
314 W Hwy 66, Grants, NM 87020
51.5 mi from Gallup
★★★★ 4.1 (29 reviews)
Saturday hours
Washer & Dryer Repair
Sears Appliance Repair
4601 E Main St, Farmington, NM 87402
92.2 mi from Gallup
★★★½ 3.3 (49 reviews)
Mentions washersSaturday hours
Appliance Repair
Appliance Service Co..
Farmington, NM 87401
88.6 mi from Gallup
★★★★½ 4.5 (15 reviews)
Appliance Repair
Star Tech Appliance LLC.
1111 Hines Rd, Farmington, NM 87401
88.8 mi from Gallup
★★★★½ 4.3 (17 reviews)
Saturday hours
Appliance Repair
Prism Appliance Repair Holbrook
107 W Hopi Dr, Holbrook, AZ 86025
90.6 mi from Gallup
★★★★★ 5.0 (4 reviews)

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

By the numbers: technicians near Gallup
Appliance repair companies in range (93 mi)6
Listing Saturday hours4
With 4.5+ stars and at least 10 reviews1
Mention washer work1
Three nearest companies, miles away0.2, 51.5, 88.6
Mention Maytag0

The leading options for Gallup are TruFix Appliance & Mobile Home Supplies (0.2 miles away, 5.0 stars from 1 reviews, lists Saturday hours); Lopez Appliance Repair (51.5 miles away, based in Grants, 4.1 stars from 29 reviews, lists Saturday hours); Sears Appliance Repair (92.2 miles away, based in Farmington, 3.3 stars from 49 reviews, lists Saturday hours); Appliance Service Co.. (88.6 miles away, based in Farmington, 4.5 stars from 15 reviews).

⚡ Get connected with a Maytag washer technician near Gallup
☎(866) 293-4411

Maytag Washer Lines and Features

Commercial-Grade Residential Agitator WasherA top load washer with a dual-action agitator, a manual water level selector and a deep water wash, built on Maytag's commercial-grade technology.
Extra PowerA button that adds a pre-wash and extra wash action to boost stain removal on any cycle.

What a Maytag Washer Technician Deals With

Select Maytag washers use commercial-grade technology that includes a stainless steel wash basket and a direct drive motor. Source: Maytag - Washers

Maytag Washer Symptoms and First Checks

Reading a Maytag Washer Error Code

CodeWhat it means
F5 E2 (front load)Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load)
F5E3Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code
F5E2Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code

When to Call for Maytag Washer Repair

  • Water on the floor under or in front of the washer
  • Loud banging, shaking or walking during the spin
  • Musty or mildew smell from the drum or door seal

Inside a Washer Repair Visit

Drain pump and filterIf water stays in the drum, the technician checks the drain path first. Most front loaders have a pump filter behind a small panel at the bottom front, and many top loaders hide a pump that can jam on a sock or coin. The pump is then tested for power and blockage.
Tub bearings and sealA rumble or roar that gets louder as the drum speeds up usually means worn bearings, often after a tub seal has let water reach them. It is one of the bigger repairs, so the technician will compare it with the washer's age and value.

Owner Care for Maytag Washers

Brand guides: Maytag Washer Not Draining or Spinning: Causes.

Budgeting for a Maytag Washer Repair

Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:

50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

What to Have Ready for a Maytag Washer Call

  • The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
  • What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
  • Any error code shown on the display

Around Gallup

Most washer calls in Gallup come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

New Mexico has no appliance-repair-only license; installing, repairing and servicing natural gas piping and listed gas appliances falls under the Construction Industries Division's MM-2 natural gas fitting classification. Source: CID License Classifications and Scopes (City of Albuquerque)

In New Mexico, you can check a license with the NM Regulation and Licensing Department, Construction Industries: Verify a License or report a problem to the New Mexico Department of Justice (Attorney General), Consumer Protection.

How to Choose a Washing Machine Technician Near Gallup

  • Is your company licensed where my state requires it, and insured?
  • What guarantee do you give on parts and labor?
  • How often do you repair Maytag washers, and how quickly can you get parts?

Maytag Washer Repair FAQs: Gallup, NM

Where is the water under my washer coming from?
Common sources are a loose or cracked fill hose, the drain hose connection, a torn door boot on a front loader, too much detergent causing suds overflow, or a leaking pump or tub seal. Unplug the washer and shut both valves, then look where the water starts.
Do you work for Maytag?
No. We are an independent directory and are not affiliated with Maytag. The companies listed are independent technicians. For manufacturer coverage questions, contact Maytag directly.
How do I get rid of a washer mildew smell?
Residue from detergent and fabric softener collects in the door boot, the dispenser and the drum. Wipe the boot, clean the dispenser, run the washer's cleaning cycle or a hot empty cycle, and leave the door open between loads.

Related Repair Pages for Gallup

Maytag Washer Repair in Nearby Cities

Write down any error code your Maytag washer shows and at what point in the cycle it appears. It helps a Gallup technician bring the right parts.

One call to a Maytag washer technician near you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech