Maytag owners in Los Alamos usually want two things from a repair company: experience with the brand and quick access to parts. The Los Alamos list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Independent Maytag Washer Technicians, Los Alamos NM
Our data shows 18 appliance repair companies inside a 60-mile radius of Los Alamos. Other nearby bases include Albuquerque (12), Ranchos De Taos (2), and Bernalillo (1). Nearest on the list: Al's Appliance Center, around 41.8 miles out. No company within 90 miles of Los Alamos mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Across 15 rated companies, the average public rating is 4.5 stars. Because the nearest shops are farther out, ask each company whether Los Alamos is inside its regular service area.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention washer work | 7 |
|---|---|
| Open on Saturdays (per listing) | 12 |
| Appliance repair companies in range (60 mi) | 18 |
| With 4.5+ stars and at least 10 reviews | 9 |
| Three nearest companies, miles away | 41.8, 47.5, 49.0 |
| Mention Maytag | 0 |
At the top of the Los Alamos list: ASAP Appliance Repair (54.2 miles away, based in Albuquerque, 4.9 stars from 657 reviews, lists Saturday hours); Sarah's Appliance Repair LLC (57.2 miles away, based in Albuquerque, 4.9 stars from 566 reviews, lists Saturday hours); Sears Appliance Repair (56.6 miles away, based in Albuquerque, 4.4 stars from 368 reviews, lists Saturday hours); Mr. Ed's Appliance Repair (51.8 miles away, based in Albuquerque, 4.8 stars from 136 reviews).
Maytag sells top-load agitator, top-load impeller, and front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Maytag Washer Lines Technicians Work On
What a Maytag Washer Technician Deals With
The washer will only run and spin when the lid or door switch senses it is fully closed, and the lid or door locks at the start of a cycle. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
What Maytag Says to Check First
- Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving
- Washer leaking. Maytag points first to loose inlet hose connections or missing hose washers, then to the drain hose and a backed-up household drain, and to clothes added mid-cycle that raise the water over the tub. Source: Maytag Product Help - Leaking Water Underneath - Washer
What Maytag Washer Codes Mean
| Code | What it means |
|---|---|
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
Signs Your Maytag Washer Needs a Technician
- Grinding or roaring noise that rises with spin speed
- Washer will not start or the lid or door stays locked
- Water on the floor under or in front of the washer
What a Washing Machine Technician Checks
Care Maytag Recommends for Its Washers
- On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal
- Use only HE detergent in HE washers and measure it per the detergent maker's directions, since too much causes oversudsing, poor rinsing and residue. Source: Maytag Product Help - HE Detergent use in a Washer
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Budgeting for a Maytag Washer Repair
Price the repair before replacing a Maytag washer. Published ranges for common jobs:
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- How old the washer is
- Any error code shown on the display
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Local Notes for Los Alamos
Most washer calls in Los Alamos come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
New Mexico has no appliance-repair-only license; installing, repairing and servicing natural gas piping and listed gas appliances falls under the Construction Industries Division's MM-2 natural gas fitting classification. Source: CID License Classifications and Scopes (City of Albuquerque)
In New Mexico, you can check a license with the NM Regulation and Licensing Department, Construction Industries: Verify a License or report a problem to the New Mexico Department of Justice (Attorney General), Consumer Protection.
Hiring a Washer Repair Company in Los Alamos
- If the washer is leaking, will you find where the water starts before quoting a part?
- What is the service call or diagnostic fee, and is it applied to the repair?
- Do you work on front-load and top-load washers, or only one type?
Maytag Washer Repair FAQs: Los Alamos, NM
Is my Maytag washer worth repairing?
Why won't my washer spin?
Why does my front-load washer smell?
Why does my Maytag washer show an error code?
Related Repair Pages for Los Alamos
Maytag Washer Repair in Nearby Cities
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.