Most Maytag washer repairs in Sanford involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. We flag companies whose listing or website mentions Maytag and fill in with nearby appliance repair companies so you always have options.
Washing Machine Repair Near Me is independent and not affiliated with Maytag. Listed companies are independent technicians who repair Maytag washers and other brands.
Independent Maytag Washer Technicians, Sanford ME
Within 30 miles of Sanford there are 12 appliance repair companies in our data. The rest are spread across Portland (4), Barrington (1), and Newington (1). Distances run up to about 30 miles. PJ's Appliance Repair is the nearest, roughly 20.5 miles from Sanford. No company within 90 miles of Sanford mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Across 11 rated companies, the average public rating is 4.2 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Distance to the three closest (mi) | 20.5, 22.9, 23.4 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 5 |
| Open on Saturdays (per listing) | 4 |
| Mention Maytag | 0 |
| Mention washer work | 1 |
| Repair companies inside 30 miles | 12 |
At the top of the Sanford list: Agren (26.2 miles away, based in South Portland, 4.8 stars from 2,172 reviews, lists Saturday hours); Appliance Remedy (23.4 miles away, based in Alton, 5.0 stars from 58 reviews); Batteries Plus Phone Repair (22.9 miles away, based in Newington, 4.9 stars from 198 reviews, lists Saturday hours); Lew's Appliance Repair (24.3 miles away, based in Durham, 4.8 stars from 67 reviews).
Know which Maytag washer you have before you call. Maytag makes top-load agitator, top-load impeller, and front-load models, and the technician will ask.
Maytag Washer Lines and Features
What Makes Maytag Washer Repairs Different
Maytag top loaders move clothes with either an agitator or an impeller, and the drive shifts between agitation and full spin, which can make a normal clunking sound. Source: Maytag - How to repair a washing machine (top load)
Common Maytag Washer Problems
- Washer not draining or not spinning. Maytag says to confirm the lid or door is fully shut and the load is balanced, then check for oversudsing, a kinked or clogged drain hose, standpipe height and, on some front loaders, a clogged drain pump filter. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
- Washer not filling. Maytag says to make sure both faucets are fully open, the inlet hoses are not kinked, and the inlet screens on the water valve are not clogged. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Maytag Washer Error Codes
| Code | What it means |
|---|---|
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
When to Call for Maytag Washer Repair
- Washer fills slowly, will not fill, or keeps filling
- An error code on the display
- Washer will not start or the lid or door stays locked
What a Washing Machine Technician Checks
Care Maytag Recommends for Its Washers
- Use only HE detergent in HE washers and measure it per the detergent maker's directions, since too much causes oversudsing, poor rinsing and residue. Source: Maytag Product Help - HE Detergent use in a Washer
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Budgeting for a Maytag Washer Repair
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Maytag Washer Call
- How old the washer is
- Any error code shown on the display
- Where the washer drains (standpipe or laundry sink)
Laundry Notes for Sanford, ME
Most washer calls in Sanford come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Maine has no general appliance repair license, but installing or servicing propane and natural gas appliances requires a Maine Fuel Board propane and natural gas technician license with an appliance connection and service authorization. Source: Maine Fuel Board - Licensing - Individual Licenses (Maine Office of Professional and Occupational Regulation)
In Maine, you can check a license with the Maine Professional and Financial Regulation Licensee Search or report a problem to the Maine Attorney General, Consumer Protection Division.
Before You Book in Sanford
- Is your company licensed where my state requires it, and insured?
- Do you work on front-load and top-load washers, or only one type?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
Maytag Washer Repair FAQs: Sanford, ME
Why does my Maytag washer show an error code?
Which Sanford technicians work on Maytag?
Should I repair or replace my Maytag washer?
Related Repair Pages for Sanford
Maytag Washer Repair Near Sanford
Before you call, find the model and serial number on your Maytag washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.