Serving Sanford, Maine and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Sanford, ME

A local list of washer repair companies near Sanford, ME, sorted by how closely they match the work, then by distance and public ratings.

Washer down in Sanford?
One call connects you with a local technician who repairs front-load and top-load washers.
☎(866) 293-4411
✓12 companies listed for Sanford✓Independent, not a manufacturer✓Public ratings & distances

Most washing machine breakdowns trace back to a short list of parts: the drain pump and its filter, the lid switch or door lock, the drive belt or motor coupling, the inlet valve and the suspension. We pull these listings from public business data, remove closed businesses, parts stores and unrelated trades, and put companies that mention washers at the top.

Washing Machine Repair Companies Near Sanford

12 repair companies serve Sanford from within 30 miles. The rest are spread across Portland (4), Barrington (1), and Newington (1). Distances run up to about 30 miles. The closest is PJ's Appliance Repair, about 20.5 miles away. 1 lists washing machine or washer work specifically. Rated companies nearby average 4.2 stars across 11 businesses.

Appliance Repair
Agren
35 Foden Rd, South Portland, ME 04106
26.2 mi from Sanford
★★★★★ 4.8 (2,172 reviews)
Mentions washersSaturday hours
Appliance Repair
Batteries Plus Phone Repair
2001 Woodbury Ave Ste 1, Newington, NH 03801
22.9 mi from Sanford
★★★★★ 4.9 (198 reviews)
Saturday hours
Appliance Repair
Lew's Appliance Repair
5 Stagecoach Rd, Durham, NH 03824
24.3 mi from Sanford
★★★★★ 4.8 (67 reviews)
Appliance Repair
McLaughlin Appliance Sales, Service & Parts
7 Bridges Dr C-1, Scarborough, ME 04074
23.7 mi from Sanford
★★★★½ 4.3 (51 reviews)
Appliance Repair
Metropolitan Services
Commercial St, Portland, ME 04101
29.7 mi from Sanford
★★★★★ 4.8 (76 reviews)
Appliance Repair
Appliance Remedy
372 Stockbridge Corner Rd, Alton, NH 03809
23.4 mi from Sanford
★★★★★ 5.0 (58 reviews)
Appliance Repair
Metropolitan Services, LLC
10 Gene Ln, West Baldwin, ME 04091
29.7 mi from Sanford
★★★★★ 5.0 (3 reviews)
Appliance Repair
Downeast Home Appliance Center
146 Rand Rd, Portland, ME 04102
27.6 mi from Sanford
★★★★ 4.2 (86 reviews)
Saturday hours
Appliance Repair
Downeast Appliance Service & Parts
144 Rand Rd, Portland, ME 04102
27.6 mi from Sanford
★★★½ 3.4 (5 reviews)
Appliance Repair
Blair's Appliance Repairs
105 Granite Rd, Effingham, NH 03882
23.8 mi from Sanford
Saturday hours
Appliance Repair
Hobart Service
19 Evergreen Dr, Portland, ME 04103
29.5 mi from Sanford
★½ 1.7 (3 reviews)
Appliance Repair
PJ's Appliance Repair
914 Calef Hwy, Barrington, NH 03825
20.5 mi from Sanford
★★★ 2.9 (13 reviews)

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

Sanford repair companies in numbers
Repair companies inside 30 miles12
Open on Saturdays (per listing)4
Mention washer work1
Rated 4.5 stars or higher (10+ reviews)5
Distance to the three closest (mi)20.5, 22.9, 23.4
Mention a major washer brand0

Closest matches for Sanford: Agren (26.2 miles away, based in South Portland, 4.8 stars from 2,172 reviews, lists Saturday hours); Batteries Plus Phone Repair (22.9 miles away, based in Newington, 4.9 stars from 198 reviews, lists Saturday hours); Lew's Appliance Repair (24.3 miles away, based in Durham, 4.8 stars from 67 reviews); McLaughlin Appliance Sales, Service & Parts (23.7 miles away, based in Scarborough, 4.3 stars from 51 reviews).

⚡ One call to reach a local washing machine repair company
☎(866) 293-4411

Signs Your Washing Machine Needs a Technician

  • Washer will not start or the lid or door stays locked
  • Musty or mildew smell from the drum or door seal
  • Washer fills slowly, will not fill, or keeps filling
  • Grinding or roaring noise that rises with spin speed

Why Washing Machines Break Down

Lid switches and door locksA washer will not fill, agitate or spin unless the lid switch or door lock tells the control the lid or door is shut and locked. A worn switch or failed lock is one of the most common parts replaced.
Drain pumps and filtersSocks, coins, hair ties and lint end up in the drain path. On most front loaders a small filter behind a panel at the bottom front catches them, and a clogged filter or jammed pump is behind many not-draining calls.
Hoses, seals and the door bootFill hoses age and crack, drain hose clamps loosen, and the rubber door boot on a front loader can tear or trap water. Leaks usually start small under the washer before they show on the floor.

Inside a Washer Repair Visit

Door boot and leaksOn front loaders the rubber door boot can tear or hold water and debris. A technician follows any leak back to its source, which may be the boot, a hose clamp, the pump, the inlet valve or the tub.
Drive belt, coupler and motorBelt-drive washers turn the drum with a belt; others use a motor coupling or a direct-drive motor bolted to the tub. A hum with no movement, a burning smell or a drum that turns by hand too easily points here.
Tub bearings and sealA rumble or roar that gets louder as the drum speeds up usually means worn bearings, often after a tub seal has let water reach them. It is one of the bigger repairs, so the technician will compare it with the washer's age and value.

Troubleshooting first? Start with washer not draining or washer not filling with water.

Leaks and Safe Shutoff

Turn off the water supply valves before disconnecting or reconnecting the washer's fill hoses. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection

Manufacturers require the washer to be electrically grounded and warn against using an extension cord or modifying the plug. Source: Maytag - High-Efficiency Washer Installation Instructions

Set the washer on a solid floor with no more than about 1 inch of slope under the cabinet, adjust the leveling feet, and tighten the locknuts against the cabinet; loose locknuts can cause vibration. Source: Whirlpool - Washer Installation Instructions

More: where washer leaks come from.

Repair or Replace Your Washer?

A washer repair is usually a single part plus labor. Reference ranges from published cost guides:

For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

What Sanford Owners Should Know

Most washer calls in Sanford come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Maine has no general appliance repair license, but installing or servicing propane and natural gas appliances requires a Maine Fuel Board propane and natural gas technician license with an appliance connection and service authorization. Source: Maine Fuel Board - Licensing - Individual Licenses (Maine Office of Professional and Occupational Regulation)

In Maine, you can check a license with the Maine Professional and Financial Regulation Licensee Search or report a problem to the Maine Attorney General, Consumer Protection Division.

Hiring a Washer Repair Company in Sanford

  • Is your company licensed where my state requires it, and insured?
  • How often do you repair your brand washers, and how quickly can you get parts?
  • If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?

Washing Machine Repair FAQs: Sanford, ME

Why does my front-load washer smell?
Residue from detergent and fabric softener collects in the door boot, the dispenser and the drum. Wipe the boot, clean the dispenser, run the washer's cleaning cycle or a hot empty cycle, and leave the door open between loads.
Why does my washer shake or walk across the floor?
An unbalanced load is the most common cause, followed by a washer that is not level. If it keeps happening with balanced loads on a level floor, worn shock absorbers, suspension springs or drum bearings are the likely cause, and a technician should check them.
Is the helpline a manufacturer?
No. We are an independent directory and are not affiliated with any appliance manufacturer. Our helpline connects you with a participating independent technician. If your washer is still under manufacturer coverage, contact the brand first.

Find Your Washer Brand in Sanford

Washing Machine Repair in Nearby Cities

Before you call a Sanford technician, check that the washer is plugged in, the hot and cold valves behind it are open and the drain hose is not kinked. If it is a front loader, clean the drain pump filter. If the problem stays, have the model number ready.

Get connected with a washer technician near Sanford
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech