A Maytag washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. The Gardner list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Maytag Washer Repair Near Gardner
We found 40 appliance repair companies within 30 miles of Gardner. 1 list an address in Gardner, and the rest are spread across Kansas City (11), Overland Park (9), and Lawrence (6). The farthest listed company is about 29 miles out. The closest is Rainbow vacuum repair, about 1.8 miles away. No company within 90 miles of Gardner mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Across 35 rated companies, the average public rating is 4.6 stars.
Companies are shown by relevance and distance from Gardner. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Three nearest companies, miles away | 1.8, 9.2, 11.1 |
|---|---|
| Appliance repair companies in range (30 mi) | 43 |
| Mention washer work | 4 |
| Rated 4.5 stars or higher (10+ reviews) | 15 |
| Listing Saturday hours | 24 |
| Mention Maytag | 0 |
The leading options for Gardner are Tager Appliance Repair (9.2 miles away, based in Olathe, 4.9 stars from 249 reviews, lists Saturday hours); Appliance Shark (21.1 miles away, based in Prairie Village, 4.9 stars from 118 reviews, lists Saturday hours); Sears Appliance Repair (19.9 miles away, based in Lawrence, 4.4 stars from 334 reviews, lists Saturday hours); A.B. May Heating, A/C, Plumbing & Electrical (27.5 miles away, based in Kansas City, 4.8 stars from 19,657 reviews, lists Saturday hours).
Maytag sells top-load agitator, top-load impeller, and front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your Maytag Washer
How Maytag Washers Are Built
Top load HE models use auto-sensing, spinning slowly to estimate the load before adding water in stages, so the water level can look lower than owners expect. Source: Maytag Product Help - Auto Sensing in a Top Load HE Washer
What Maytag Says to Check First
- Washer not filling. Maytag says to make sure both faucets are fully open, the inlet hoses are not kinked, and the inlet screens on the water valve are not clogged. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
Signs Your Maytag Washer Needs a Technician
- Washer will not start or the lid or door stays locked
- Burning smell or a motor that hums without turning
- Water on the floor under or in front of the washer
How a Washer Service Call Usually Goes in Gardner
Care Maytag Recommends for Its Washers
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
What Maytag Washer Repairs Cost
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Maytag Washer Call
- How old the washer is
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Any error code shown on the display
Local Notes for Gardner
Most washer calls in Gardner come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
In Kansas, you can report a problem to the Kansas Attorney General Public Protection Division (Consumer Protection).
How to Choose a Washing Machine Technician Near Gardner
- Is your company licensed where my state requires it, and insured?
- What guarantee do you give on parts and labor?
- If the washer is leaking, will you find where the water starts before quoting a part?
Maytag Washer Repair FAQs: Gardner, KS
Why is my washer leaking?
Do you work for Maytag?
How do I find a technician who knows Maytag washers?
More Washing Machine Repair in Gardner, KS
Maytag Washer Repair in Nearby Cities
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.