Maytag owners in Spring Hill usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving Spring Hill, with those that mention Maytag first, then the nearest appliance repair companies.
Washing Machine Repair Near Me is independent and not affiliated with Maytag. Listed companies are independent technicians who repair Maytag washers and other brands.
Independent Maytag Washer Technicians, Spring Hill KS
We found 40 appliance repair companies within 30 miles of Spring Hill. Other nearby bases include Overland Park (9), Kansas City (9), and Lee's Summit (4). Distances run up to about 27 miles. No company within 90 miles of Spring Hill mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rainbow vacuum repair is the nearest, roughly 6.1 miles from Spring Hill. Rated companies nearby average 4.6 stars across 34 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Name washers or washing machines in their listing | 6 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 20 |
| Listing Saturday hours | 29 |
| Mention Maytag | 0 |
| Appliance repair companies in range (30 mi) | 51 |
| Distance to the three closest (mi) | 6.1, 8.8, 9.4 |
Closest matches for Spring Hill: Tager Appliance Repair (8.8 miles away, based in Olathe, 4.9 stars from 249 reviews, lists Saturday hours); Appliance Shark (19.8 miles away, based in Prairie Village, 4.9 stars from 118 reviews, lists Saturday hours); A.B. May Heating, A/C, Plumbing & Electrical (25.7 miles away, based in Kansas City, 4.8 stars from 19,657 reviews, lists Saturday hours); The Appliance Care Company (16.1 miles away, based in Belton, 4.5 stars from 1,041 reviews, lists Saturday hours).
Know which Maytag washer you have before you call. Maytag makes top-load agitator, top-load impeller, and front-load models, and the technician will ask.
Know Your Maytag Washer
What a Maytag Washer Technician Deals With
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
The washer will only run and spin when the lid or door switch senses it is fully closed, and the lid or door locks at the start of a cycle. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
Maytag Washer Symptoms and First Checks
- Washer not filling. Maytag says to make sure both faucets are fully open, the inlet hoses are not kinked, and the inlet screens on the water valve are not clogged. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- Lid or door won't lock. For lid or door lock codes, Maytag says to check for clothing or objects blocking the latch area and then reset the washer by unplugging it for five minutes. Source: Maytag Product Help - F5E2 - Error Code (top load)
What Maytag Washer Codes Mean
| Code | What it means |
|---|---|
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
When to Call for Maytag Washer Repair
- Musty or mildew smell from the drum or door seal
- An error code on the display
- Washer fills slowly, will not fill, or keeps filling
What a Washing Machine Technician Checks
Care Maytag Recommends for Its Washers
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Maytag Washer Repair Cost Ranges
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Maytag Washer Call
- How old the washer is
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Any error code shown on the display
Around Spring Hill
Most washer calls in Spring Hill come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
In Kansas, you can report a problem to the Kansas Attorney General Public Protection Division (Consumer Protection).
Hiring a Washer Repair Company in Spring Hill
- Will you check the drain pump filter and drain hose before replacing the pump?
- If a part has to be ordered, how soon can you come back to finish?
- Can you give a written estimate before ordering parts?
Maytag Washer Repair FAQs: Spring Hill, KS
What stops a washer from spinning?
Why does my front-load washer smell?
How do I find a technician who knows Maytag washers?
Why is my washer leaking?
Related Repair Pages for Spring Hill
More Maytag Washer Repair Pages Nearby
Write down any error code your Maytag washer shows and at what point in the cycle it appears. It helps a Spring Hill technician bring the right parts.