Most Maytag washer repairs in Manhattan involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Manhattan list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Maytag. If your washer is still under manufacturer coverage, contact Maytag directly.
Who Works on Maytag Washers Near Manhattan
Our data shows 15 appliance repair companies inside a 60-mile radius of Manhattan. 2 of them are based in Manhattan itself, and other nearby bases include Topeka (5), Salina (3), and Junction City (2). Distances run up to about 60 miles. Simurgh Project is the nearest, roughly 1.6 miles from Manhattan. None of the repair companies near Manhattan name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The 14 rated companies in range average 3.9 stars. Because the nearest shops are farther out, ask each company whether Manhattan is inside its regular service area.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Listing Saturday hours | 6 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 3 |
| Mention Maytag | 0 |
| Three nearest companies, miles away | 1.6, 4.7, 16.6 |
| Appliance repair companies in range (60 mi) | 15 |
| Mention washer work | 2 |
At the top of the Manhattan list: Sears Appliance Repair (16.6 miles away, based in Junction City, 4.4 stars from 152 reviews, lists Saturday hours); F & C Appliance (4.7 miles away, 4.3 stars from 28 reviews); Simurgh Project (1.6 miles away); Wall's Appliance & Services. (30.8 miles away, based in Clay Center, 4.8 stars from 5 reviews, lists Saturday hours).
Maytag sells top-load agitator, top-load impeller, and front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your Maytag Washer
What a Maytag Washer Technician Deals With
The washer will only run and spin when the lid or door switch senses it is fully closed, and the lid or door locks at the start of a cycle. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
Top load HE models use auto-sensing, spinning slowly to estimate the load before adding water in stages, so the water level can look lower than owners expect. Source: Maytag Product Help - Auto Sensing in a Top Load HE Washer
What Maytag Says to Check First
- Washer leaking. Maytag points first to loose inlet hose connections or missing hose washers, then to the drain hose and a backed-up household drain, and to clothes added mid-cycle that raise the water over the tub. Source: Maytag Product Help - Leaking Water Underneath - Washer
- Washer odor. Maytag links odor to skipped cleanings, wet loads left sitting and too much detergent or softener, and recommends regular washer cleaning and moving loads out promptly. Source: Maytag - How to repair a washing machine (top load)
What Maytag Washer Codes Mean
| Code | What it means |
|---|---|
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
Signs Your Maytag Washer Needs a Technician
- Washer will not spin, or clothes come out soaking wet
- Musty or mildew smell from the drum or door seal
- An error code on the display
Inside a Washer Repair Visit
Keeping a Maytag Washer Running
- Run the Clean Washer cycle with a washer cleaning tablet about once a month, or when the clean washer light comes on or odor appears; without that cycle, use the hottest, highest water setting. Source: Maytag Product Help - Cleaning Washers with affresh
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
What Maytag Washer Repairs Cost
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Maytag Washer Call
- How old the washer is
- Any error code shown on the display
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
What Manhattan Owners Should Know
Most washer calls in Manhattan come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
In Kansas, you can report a problem to the Kansas Attorney General Public Protection Division (Consumer Protection).
Hiring a Washer Repair Company in Manhattan
- If a part has to be ordered, how soon can you come back to finish?
- Can you give a written estimate before ordering parts?
- If the washer is leaking, will you find where the water starts before quoting a part?
Maytag Washer Repair FAQs: Manhattan, KS
Why is my washer leaking?
Which Manhattan technicians work on Maytag?
What stops a washer from spinning?
Related Repair Pages for Manhattan
More Maytag Washer Repair Pages Nearby
Write down any error code your Maytag washer shows and at what point in the cycle it appears. It helps a Manhattan technician bring the right parts.