A Maytag washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. The Junction City list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
Washing Machine Repair Near Me is independent and not affiliated with Maytag. Listed companies are independent technicians who repair Maytag washers and other brands.
Maytag Washer Repair Near Junction City
Within 60 miles of Junction City there are 15 appliance repair companies in our data. 2 list an address in Junction City, and the rest are spread across Salina (5), Topeka (4), and Manhattan (2). Nearest on the list: American Appliance Service, around 0.4 miles out. No company within 90 miles of Junction City mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 14 rated companies in range average 4.0 stars. Because the nearest shops are farther out, ask each company whether Junction City is inside its regular service area.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention Maytag | 0 |
|---|---|
| Name washers or washing machines in their listing | 3 |
| Rated 4.5 stars or higher (10+ reviews) | 5 |
| Listing Saturday hours | 6 |
| Repair companies inside 60 miles | 15 |
| Three nearest companies, miles away | 0.4, 1.1, 17.9 |
At the top of the Junction City list: Sears Appliance Repair (1.1 miles away, 4.4 stars from 152 reviews, lists Saturday hours); Sears Appliance Repair (43.9 miles away, based in Salina, 4.5 stars from 78 reviews, lists Saturday hours); F & C Appliance (19.2 miles away, based in Manhattan, 4.3 stars from 28 reviews); American Appliance Service (0.4 miles away, 3.4 stars from 18 reviews).
Know Your Maytag Washer
What a Maytag Washer Technician Deals With
The washer will only run and spin when the lid or door switch senses it is fully closed, and the lid or door locks at the start of a cycle. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
Common Maytag Washer Problems
- Washer not draining or not spinning. Maytag says to confirm the lid or door is fully shut and the load is balanced, then check for oversudsing, a kinked or clogged drain hose, standpipe height and, on some front loaders, a clogged drain pump filter. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
- Washer not filling. Maytag says to make sure both faucets are fully open, the inlet hoses are not kinked, and the inlet screens on the water valve are not clogged. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
What Maytag Washer Codes Mean
| Code | What it means |
|---|---|
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
Maytag Washer Problems Worth a Service Call
- An error code on the display
- Grinding or roaring noise that rises with spin speed
- Water on the floor under or in front of the washer
How a Washer Service Call Usually Goes in Junction City
Keeping a Maytag Washer Running
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- Use only HE detergent in HE washers and measure it per the detergent maker's directions, since too much causes oversudsing, poor rinsing and residue. Source: Maytag Product Help - HE Detergent use in a Washer
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Maytag Washer Repair Cost Ranges
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- How old the washer is
- Any error code shown on the display
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
What Junction City Owners Should Know
Most washer calls in Junction City come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
In Kansas, you can report a problem to the Kansas Attorney General Public Protection Division (Consumer Protection).
Before You Book in Junction City
- Is your company licensed where my state requires it, and insured?
- If the washer is leaking, will you find where the water starts before quoting a part?
- If a part has to be ordered, how soon can you come back to finish?
Maytag Washer Repair FAQs: Junction City, KS
Is this Maytag customer service?
Why does my front-load washer smell?
How do I find a technician who knows Maytag washers?
What should I do about a Maytag error code?
More Washing Machine Repair in Junction City, KS
Maytag Washer Repair in Nearby Cities
Before you call, find the model and serial number on your Maytag washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.