Most Maytag washer repairs in Granite City involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Granite City, with those that mention Maytag first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Maytag Washer Repair Near Granite City
40 repair companies serve Granite City from within 30 miles. 2 of them are based in Granite City itself, and the rest are spread across St. Louis (16), Edwardsville (3), and Fairview Heights (3). Distances run up to about 13 miles. 1 lists Maytag specifically. The closest is Granite City Appliance Repair., about 2.3 miles away. Across 26 rated companies, the average public rating is 4.1 stars.
Companies are shown by relevance and distance from Granite City. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Three nearest companies, miles away | 2.3, 2.7, 3.0 |
|---|---|
| Open on Saturdays (per listing) | 42 |
| Companies within 30 miles | 60 |
| Mention Maytag | 1 |
| Rated 4.5 stars or higher (10+ reviews) | 13 |
| Mention washer work | 11 |
The leading options for Granite City are Advantage Maytag (8.0 miles away, based in Collinsville, 3.9 stars from 49 reviews, lists Saturday hours); Mr. Appliance of Mid America (12.8 miles away, based in Fairview Heights, 4.8 stars from 1,246 reviews, lists Saturday hours); All American Appliance and HVAC Services (11.9 miles away, based in St. Louis, 4.7 stars from 2,771 reviews, lists Saturday hours); Hoffmann Brothers (10.3 miles away, based in St. Louis, 4.9 stars from 5,162 reviews, lists Saturday hours).
Know which Maytag washer you have before you call. Maytag makes top-load agitator, top-load impeller, and front-load models, and the technician will ask.
Know Your Maytag Washer
What Makes Maytag Washer Repairs Different
The washer will only run and spin when the lid or door switch senses it is fully closed, and the lid or door locks at the start of a cycle. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
Maytag Washer Symptoms and First Checks
- Washer not filling. Maytag says to make sure both faucets are fully open, the inlet hoses are not kinked, and the inlet screens on the water valve are not clogged. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- Lid or door won't lock. For lid or door lock codes, Maytag says to check for clothing or objects blocking the latch area and then reset the washer by unplugging it for five minutes. Source: Maytag Product Help - F5E2 - Error Code (top load)
What Maytag Washer Codes Mean
| Code | What it means |
|---|---|
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
Signs Your Maytag Washer Needs a Technician
- Musty or mildew smell from the drum or door seal
- Water on the floor under or in front of the washer
- Washer will not start or the lid or door stays locked
How a Washer Service Call Usually Goes in Granite City
Owner Care for Maytag Washers
- Use only HE detergent in HE washers and measure it per the detergent maker's directions, since too much causes oversudsing, poor rinsing and residue. Source: Maytag Product Help - HE Detergent use in a Washer
- On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Budgeting for a Maytag Washer Repair
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Maytag Washer Call
- How old the washer is
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
What Granite City Owners Should Know
Most washer calls in Granite City come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
In Illinois, you can check a license with the Illinois Department of Public Health Plumber License Search or report a problem to the Illinois Attorney General Consumer Fraud Bureau.
Before You Book in Granite City
- Do you work on front-load and top-load washers, or only one type?
- How often do you repair Maytag washers, and how quickly can you get parts?
- What is the service call or diagnostic fee, and is it applied to the repair?
Maytag Washer Repair FAQs: Granite City, IL
Is this Maytag customer service?
What stops a washer from spinning?
What should I do about a Maytag error code?
Why is my washer leaking?
Related Repair Pages for Granite City
Maytag Washer Repair in Nearby Cities
Write down any error code your Maytag washer shows and at what point in the cycle it appears. It helps a Granite City technician bring the right parts.