Most Maytag washer repairs in Glen Carbon involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Glen Carbon list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
Washing Machine Repair Near Me is independent and not affiliated with Maytag. Listed companies are independent technicians who repair Maytag washers and other brands.
Independent Maytag Washer Technicians, Glen Carbon IL
Our data shows 40 appliance repair companies inside a 30-mile radius of Glen Carbon. The rest are spread across St. Louis (12), Alton (4), and Belleville (4). Distances run up to about 18 miles. Nearest on the list: Hoffmann Brothers, around 2.8 miles out. Of those, 1 mentions Maytag by name. The 29 rated companies in range average 4.0 stars.
Companies are shown by relevance and distance from Glen Carbon. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention Maytag | 1 |
|---|---|
| Open on Saturdays (per listing) | 40 |
| Appliance repair companies in range (30 mi) | 60 |
| Rated 4.5 stars or higher (10+ reviews) | 13 |
| Mention washer work | 11 |
| Three nearest companies, miles away | 2.8, 3.1, 3.1 |
The leading options for Glen Carbon are Advantage Maytag (7.0 miles away, based in Collinsville, 3.9 stars from 49 reviews, lists Saturday hours); Mr. Appliance of Mid America (12.2 miles away, based in Fairview Heights, 4.8 stars from 1,246 reviews, lists Saturday hours); Hoffmann Brothers (2.8 miles away, based in Edwardsville, 4.9 stars from 5,567 reviews, lists Saturday hours); Hoffmann Brothers (17.6 miles away, based in St. Louis, 4.9 stars from 5,162 reviews, lists Saturday hours).
Know which Maytag washer you have before you call. Maytag makes top-load agitator, top-load impeller, and front-load models, and the technician will ask.
Maytag Washer Lines Technicians Work On
How Maytag Washers Are Built
Top load HE models use auto-sensing, spinning slowly to estimate the load before adding water in stages, so the water level can look lower than owners expect. Source: Maytag Product Help - Auto Sensing in a Top Load HE Washer
Maytag Washer Symptoms and First Checks
- Washer odor. Maytag links odor to skipped cleanings, wet loads left sitting and too much detergent or softener, and recommends regular washer cleaning and moving loads out promptly. Source: Maytag - How to repair a washing machine (top load)
- Washer leaking. Maytag points first to loose inlet hose connections or missing hose washers, then to the drain hose and a backed-up household drain, and to clothes added mid-cycle that raise the water over the tub. Source: Maytag Product Help - Leaking Water Underneath - Washer
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
Maytag Washer Problems Worth a Service Call
- Musty or mildew smell from the drum or door seal
- Water left in the drum after the cycle
- Washer will not start or the lid or door stays locked
What Gets Fixed on a Glen Carbon Washer Call
Keeping a Maytag Washer Running
- Use only HE detergent in HE washers and measure it per the detergent maker's directions, since too much causes oversudsing, poor rinsing and residue. Source: Maytag Product Help - HE Detergent use in a Washer
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Maytag Washer Repair Cost Ranges
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Maytag Washer Call
- How old the washer is
- Where the washer drains (standpipe or laundry sink)
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
What Glen Carbon Owners Should Know
Most washer calls in Glen Carbon come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
In Illinois, you can check a license with the Illinois Department of Public Health Plumber License Search or report a problem to the Illinois Attorney General Consumer Fraud Bureau.
Questions to Ask a Glen Carbon Washer Technician
- Is your company licensed where my state requires it, and insured?
- What guarantee do you give on parts and labor?
- What is the service call or diagnostic fee, and is it applied to the repair?
Maytag Washer Repair FAQs: Glen Carbon, IL
How do I find a technician who knows Maytag washers?
How do I get rid of a washer mildew smell?
Do you work for Maytag?
Should I repair or replace my Maytag washer?
Other Washer Repair in Glen Carbon
Maytag Washer Repair Near Glen Carbon
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.