Most Maytag washer repairs in Aurora involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Aurora list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Independent Maytag Washer Technicians, Aurora IL
Within 30 miles of Aurora there are 40 appliance repair companies in our data. 25 list an address in Aurora, and the rest are spread across Naperville (8), Oswego (2), and Batavia (2). Distances run up to about 7 miles. 1 of them mentions Maytag in their listing or website. Nearest on the list: Fox Valley Appliance LLC, around 0.2 miles out. Rated companies nearby average 4.6 stars across 28 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Open on Saturdays (per listing) | 44 |
|---|---|
| Mention washer work | 6 |
| Repair companies inside 30 miles | 60 |
| With 4.5+ stars and at least 10 reviews | 9 |
| Mention Maytag | 1 |
| Distance to the three closest (mi) | 0.2, 0.4, 0.7 |
Closest matches for Aurora: Maytag (5.3 miles away, based in Naperville, 4.4 stars from 5 reviews); Maytag Appliance Repair (19.9 miles away, based in Elmhurst, 4.4 stars from 5 reviews, lists Saturday hours); Maytag Appliance Repair (31.9 miles away, based in Wheeling, 3.0 stars from 6 reviews, lists Saturday hours); Leonardi Appliance (2.1 miles away, 4.8 stars from 289 reviews).
Maytag Washer Lines Technicians Work On
How Maytag Washers Are Built
Top load HE models use auto-sensing, spinning slowly to estimate the load before adding water in stages, so the water level can look lower than owners expect. Source: Maytag Product Help - Auto Sensing in a Top Load HE Washer
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
What Maytag Says to Check First
- Washer leaking. Maytag points first to loose inlet hose connections or missing hose washers, then to the drain hose and a backed-up household drain, and to clothes added mid-cycle that raise the water over the tub. Source: Maytag Product Help - Leaking Water Underneath - Washer
- Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving
Maytag Washer Error Codes
| Code | What it means |
|---|---|
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
Maytag Washer Problems Worth a Service Call
- Water on the floor under or in front of the washer
- Washer will not spin, or clothes come out soaking wet
- An error code on the display
What Gets Fixed on a Aurora Washer Call
Care Maytag Recommends for Its Washers
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
What Maytag Washer Repairs Cost
Price the repair before replacing a Maytag washer. Published ranges for common jobs:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- How old the washer is
Laundry Notes for Aurora, IL
Most washer calls in Aurora come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
In Illinois, you can check a license with the Illinois Department of Public Health Plumber License Search or report a problem to the Illinois Attorney General Consumer Fraud Bureau.
Hiring a Washer Repair Company in Aurora
- How often do you repair Maytag washers, and how quickly can you get parts?
- If a part has to be ordered, how soon can you come back to finish?
- What is the service call or diagnostic fee, and is it applied to the repair?
Maytag Washer Repair FAQs: Aurora, IL
Why does my Maytag washer show an error code?
How do I get rid of a washer mildew smell?
What stops a washer from spinning?
More Washing Machine Repair in Aurora, IL
More Maytag Washer Repair Pages Nearby
Before you call, find the model and serial number on your Maytag washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.