Most Maytag washer repairs in Crystal Lake involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Crystal Lake list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Maytag. If your washer is still under manufacturer coverage, contact Maytag directly.
Who Works on Maytag Washers Near Crystal Lake
Within 30 miles of Crystal Lake there are 40 appliance repair companies in our data. 3 list an address in Crystal Lake, and the rest are spread across Elgin (8), Lake in the Hills (6), and Carpentersville (3). Distances run up to about 14 miles. No company within 30 miles of Crystal Lake names Maytag in its listing, so the list adds matches from farther out and the closest appliance repair companies. Sears Appliance Repair is the nearest, roughly 0.8 miles from Crystal Lake. Rated companies nearby average 4.8 stars across 36 businesses.
Companies are shown by relevance and distance from Crystal Lake. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention Maytag | 0 |
|---|---|
| Name washers or washing machines in their listing | 11 |
| Listing Saturday hours | 40 |
| Distance to the three closest (mi) | 0.8, 1.4, 2.8 |
| Rated 4.5 stars or higher (10+ reviews) | 20 |
| Repair companies inside 30 miles | 60 |
First up for Crystal Lake: Maytag Appliance Repair (31.0 miles away, based in Elmhurst, 4.4 stars from 5 reviews, lists Saturday hours); Maytag (31.0 miles away, based in Naperville, 4.4 stars from 5 reviews); Maytag Appliance Repair (21.8 miles away, based in Wheeling, 3.0 stars from 6 reviews, lists Saturday hours); SMD Brothers Appliance Repair & Services (12.5 miles away, based in Elgin, 5.0 stars from 47 reviews, lists Saturday hours).
Know which Maytag washer you have before you call. Maytag makes top-load agitator, top-load impeller, and front-load models, and the technician will ask.
Maytag Washer Lines Technicians Work On
What Makes Maytag Washer Repairs Different
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
Common Maytag Washer Problems
- Lid or door won't lock. For lid or door lock codes, Maytag says to check for clothing or objects blocking the latch area and then reset the washer by unplugging it for five minutes. Source: Maytag Product Help - F5E2 - Error Code (top load)
- Washer leaking. Maytag points first to loose inlet hose connections or missing hose washers, then to the drain hose and a backed-up household drain, and to clothes added mid-cycle that raise the water over the tub. Source: Maytag Product Help - Leaking Water Underneath - Washer
Maytag Washer Error Codes
| Code | What it means |
|---|---|
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
Maytag Washer Problems Worth a Service Call
- Water left in the drum after the cycle
- Musty or mildew smell from the drum or door seal
- An error code on the display
How a Washer Service Call Usually Goes in Crystal Lake
Keeping a Maytag Washer Running
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Budgeting for a Maytag Washer Repair
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- How old the washer is
Around Crystal Lake
Most washer calls in Crystal Lake come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
In Illinois, you can check a license with the Illinois Department of Public Health Plumber License Search or report a problem to the Illinois Attorney General Consumer Fraud Bureau.
Questions to Ask a Crystal Lake Washer Technician
- Do you work on front-load and top-load washers, or only one type?
- Will you check the drain pump filter and drain hose before replacing the pump?
- What is the service call or diagnostic fee, and is it applied to the repair?
Maytag Washer Repair FAQs: Crystal Lake, IL
Where is the water under my washer coming from?
Which Crystal Lake technicians work on Maytag?
How do I get rid of a washer mildew smell?
Related Repair Pages for Crystal Lake
More Maytag Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.