Most Maytag washer repairs in Globe involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Globe list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Independent Maytag Washer Technicians, Globe AZ
Our data shows 36 appliance repair companies inside a 60-mile radius of Globe. Other nearby bases include Gilbert (11), Mesa (9), and Apache Junction (4). The farthest listed company is about 60 miles out. None of the repair companies near Globe name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The closest is Sanctuary Appliance Repair Operators, about 44.1 miles away. The 29 rated companies in range average 4.8 stars. Globe is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Companies are shown by relevance and distance from Globe. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| With 4.5+ stars and at least 10 reviews | 14 |
|---|---|
| Repair companies inside 60 miles | 36 |
| Name washers or washing machines in their listing | 6 |
| Mention Maytag | 0 |
| Distance to the three closest (mi) | 44.1, 45.2, 46.0 |
| Listing Saturday hours | 22 |
First up for Globe: Appliance Care & Repair (57.7 miles away, based in Mesa, 4.9 stars from 115 reviews, lists Saturday hours); Steve's Appliance Repair (53.3 miles away, based in Queen Creek, 4.9 stars from 82 reviews); Phoenix Appliance Repair, LLC (54.9 miles away, based in Gilbert, 5.0 stars from 42 reviews); Sears Appliance Repair (54.2 miles away, based in Mesa, 4.6 stars from 226 reviews, lists Saturday hours).
Maytag sells top-load agitator, top-load impeller, and front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your Maytag Washer
How Maytag Washers Are Built
Top load HE models use auto-sensing, spinning slowly to estimate the load before adding water in stages, so the water level can look lower than owners expect. Source: Maytag Product Help - Auto Sensing in a Top Load HE Washer
Maytag Washer Symptoms and First Checks
- Washer not draining or not spinning. Maytag says to confirm the lid or door is fully shut and the load is balanced, then check for oversudsing, a kinked or clogged drain hose, standpipe height and, on some front loaders, a clogged drain pump filter. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
- Lid or door won't lock. For lid or door lock codes, Maytag says to check for clothing or objects blocking the latch area and then reset the washer by unplugging it for five minutes. Source: Maytag Product Help - F5E2 - Error Code (top load)
What Maytag Washer Codes Mean
| Code | What it means |
|---|---|
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
Maytag Washer Problems Worth a Service Call
- Washer will not spin, or clothes come out soaking wet
- Grinding or roaring noise that rises with spin speed
- Musty or mildew smell from the drum or door seal
What Gets Fixed on a Globe Washer Call
Care Maytag Recommends for Its Washers
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Maytag Washer Repair Cost Ranges
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Maytag Washer Call
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Where the washer drains (standpipe or laundry sink)
- Any error code shown on the display
What Globe Owners Should Know
Most washer calls in Globe come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Arizona has no appliance-repair-specific license; work is regulated through Registrar of Contractors classifications, and state law removes the small-job (under $1,000) handyman exemption for any work connecting or repairing appliances on natural gas or propane. Source: A.R.S. 32-1121 - Persons not required to be licensed
In Arizona, you can check a license with the Arizona Registrar of Contractors Contractor Search or report a problem to the Arizona Attorney General Consumer Protection.
Questions to Ask a Globe Washer Technician
- How often do you repair Maytag washers, and how quickly can you get parts?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- If the washer is leaking, will you find where the water starts before quoting a part?
Maytag Washer Repair FAQs: Globe, AZ
What stops a washer from spinning?
Do you work for Maytag?
Should I repair or replace my Maytag washer?
Related Repair Pages for Globe
Maytag Washer Repair Near Globe
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.