Maytag owners in Glendale usually want two things from a repair company: experience with the brand and quick access to parts. The Glendale list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Maytag Washers Near Glendale
Within 30 miles of Glendale there are 40 appliance repair companies in our data. 25 of them are based in Glendale itself, and other nearby bases include Peoria (10), Sun City (3), and El Mirage (1). The farthest listed company is about 5 miles out. No company within 90 miles of Glendale mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is CCO Appliance Repair, about 0.5 miles away. The 31 rated companies in range average 4.6 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Rated 4.5 stars or higher (10+ reviews) | 20 |
|---|---|
| Open on Saturdays (per listing) | 37 |
| Distance to the three closest (mi) | 0.5, 0.5, 1.1 |
| Name washers or washing machines in their listing | 12 |
| Mention Maytag | 0 |
| Companies within 30 miles | 60 |
At the top of the Glendale list: Mr. Appliance of Surprise and Goodyear (3.2 miles away, based in Sun City, 4.8 stars from 832 reviews, lists Saturday hours); Click and done home services LLC (5.0 miles away, based in Phoenix, 4.9 stars from 125 reviews); Appliance Works (3.2 miles away, based in Sun City, 5.0 stars from 376 reviews); Glendale Danby Repair (4.1 miles away, 4.5 stars from 12 reviews, lists Saturday hours).
Maytag Washer Lines Technicians Work On
What Makes Maytag Washer Repairs Different
Maytag top loaders move clothes with either an agitator or an impeller, and the drive shifts between agitation and full spin, which can make a normal clunking sound. Source: Maytag - How to repair a washing machine (top load)
What Maytag Says to Check First
- Washer leaking. Maytag points first to loose inlet hose connections or missing hose washers, then to the drain hose and a backed-up household drain, and to clothes added mid-cycle that raise the water over the tub. Source: Maytag Product Help - Leaking Water Underneath - Washer
- Washer not filling. Maytag says to make sure both faucets are fully open, the inlet hoses are not kinked, and the inlet screens on the water valve are not clogged. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
Maytag Washer Problems Worth a Service Call
- Burning smell or a motor that hums without turning
- Water on the floor under or in front of the washer
- Washer will not start or the lid or door stays locked
What Gets Fixed on a Glendale Washer Call
Care Maytag Recommends for Its Washers
- On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
What Maytag Washer Repairs Cost
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Maytag Washer Call
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- How old the washer is
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Around Glendale
Most washer calls in Glendale come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Arizona has no appliance-repair-specific license; work is regulated through Registrar of Contractors classifications, and state law removes the small-job (under $1,000) handyman exemption for any work connecting or repairing appliances on natural gas or propane. Source: A.R.S. 32-1121 - Persons not required to be licensed
In Arizona, you can check a license with the Arizona Registrar of Contractors Contractor Search or report a problem to the Arizona Attorney General Consumer Protection.
Questions to Ask a Glendale Washer Technician
- How often do you repair Maytag washers, and how quickly can you get parts?
- If a part has to be ordered, how soon can you come back to finish?
- What is the service call or diagnostic fee, and is it applied to the repair?
Maytag Washer Repair FAQs: Glendale, AZ
Why is my washer leaking?
How do I find a technician who knows Maytag washers?
Do you work for Maytag?
More Washing Machine Repair in Glendale, AZ
More Maytag Washer Repair Pages Nearby
Before you call, find the model and serial number on your Maytag washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.