If your Amana washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Glendale list starts with companies that name Amana, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Amana. If your washer is still under manufacturer coverage, contact Amana directly.
Independent Amana Washer Technicians, Glendale AZ
We found 40 appliance repair companies within 30 miles of Glendale. 25 list an address in Glendale, and other nearby bases include Peoria (10), Sun City (3), and El Mirage (1). Distances run up to about 5 miles. 1 lists Amana specifically. The closest is CCO Appliance Repair, about 0.5 miles away. Rated companies nearby average 4.6 stars across 31 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention Amana | 1 |
|---|---|
| Appliance repair companies in range (30 mi) | 60 |
| Listing Saturday hours | 37 |
| With 4.5+ stars and at least 10 reviews | 20 |
| Three nearest companies, miles away | 0.5, 0.5, 1.1 |
| Name washers or washing machines in their listing | 12 |
At the top of the Glendale list: Glendale Amana Repair (4.7 miles away, 4.6 stars from 11 reviews); Appliance Works (3.2 miles away, based in Sun City, 5.0 stars from 376 reviews); 5 Star Appliance Repair LLC (3.6 miles away, 4.8 stars from 62 reviews, lists Saturday hours); Mr. Appliance of Surprise and Goodyear (3.2 miles away, based in Sun City, 4.8 stars from 832 reviews, lists Saturday hours).
Amana sells top-load agitator washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Amana Washer Lines and Features
What Makes Amana Washer Repairs Different
Amana gives a drainpipe height range of 30 inches minimum to 96 inches maximum, and above the maximum, water can flow back into the washer. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
Amana Washer Symptoms and First Checks
- Washer shaking or walking. Amana says to spread the load evenly, make sure the shipping bolts were removed, and adjust the feet until all four touch the floor and the washer doesn't rock. Source: Amana - Washer is Vibrating, Walking or Moving
- Washer odor. For front loaders, Amana says to clean and dry the door seal, take wet clothes out promptly, avoid overloading, and leave the door open between loads. Source: Amana - Cleaning a Front Load Washer Door Seal
What Amana Washer Codes Mean
| Code | What it means |
|---|---|
| F7 E1 | Front load: motor speed sensing error, so check that the shipping bolts are out and the washer isn't overloaded. Source: Amana - Error Codes in Front Load Washers |
| LdU | Top load: the lid can't unlock because something is sitting on top of the washer. Source: Amana - Error Codes in Top Load HE Washers |
| HC | Top load: the hot and cold inlet hoses are connected backward. Source: Amana - Error Codes in Top Load HE Washers |
Amana Washer Problems Worth a Service Call
- Washer will not spin, or clothes come out soaking wet
- Grinding or roaring noise that rises with spin speed
- Musty or mildew smell from the drum or door seal
Inside a Washer Repair Visit
Care Amana Recommends for Its Washers
- With the water supply turned off, check the inlet screens on the water valve and brush them clean with mild soapy water, leaving the screens in place. Source: Amana - Checking the Fill Hoses if the Washer is not Filling
- On front loaders, wipe the door seal clean and dry its folds, take wet clothes out promptly, and leave the door open between uses. Source: Amana - Cleaning a Front Load Washer Door Seal
Amana Washer Repair Cost Ranges
Price the repair before replacing a Amana washer. Published ranges for common jobs:
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Any error code shown on the display
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Around Glendale
Most washer calls in Glendale come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Arizona has no appliance-repair-specific license; work is regulated through Registrar of Contractors classifications, and state law removes the small-job (under $1,000) handyman exemption for any work connecting or repairing appliances on natural gas or propane. Source: A.R.S. 32-1121 - Persons not required to be licensed
In Arizona, you can check a license with the Arizona Registrar of Contractors Contractor Search or report a problem to the Arizona Attorney General Consumer Protection.
Hiring a Washer Repair Company in Glendale
- Will you check the drain pump filter and drain hose before replacing the pump?
- Is your company licensed where my state requires it, and insured?
- What guarantee do you give on parts and labor?
Amana Washer Repair FAQs: Glendale, AZ
Why does my Amana washer show an error code?
Where is the water under my washer coming from?
Why won't my washer spin?
Other Washer Repair in Glendale
Amana Washer Repair in Nearby Cities
Before you call, find the model and serial number on your Amana washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.