If your Electrolux washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. We flag companies whose listing or website mentions Electrolux and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with Electrolux, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Electrolux Washers Near Globe
36 repair companies serve Globe from within 60 miles. The rest are spread across Gilbert (11), Mesa (9), and Apache Junction (4). The farthest listed company is about 60 miles out. The closest is Sanctuary Appliance Repair Operators, about 44.1 miles away. None of the repair companies near Globe name Electrolux in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Across 29 rated companies, the average public rating is 4.8 stars. Globe is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| With 4.5+ stars and at least 10 reviews | 14 |
|---|---|
| Open on Saturdays (per listing) | 22 |
| Mention Electrolux | 0 |
| Three nearest companies, miles away | 44.1, 45.2, 46.0 |
| Companies within 60 miles | 36 |
| Mention washer work | 6 |
At the top of the Globe list: Rhino Appliance Repair (58.8 miles away, based in Gilbert, 4.6 stars from 53 reviews, lists Saturday hours); Phoenix Appliance Repair, LLC (54.9 miles away, based in Gilbert, 5.0 stars from 42 reviews); Appliance Care & Repair (57.7 miles away, based in Mesa, 4.9 stars from 115 reviews, lists Saturday hours); Sears Appliance Repair (54.2 miles away, based in Mesa, 4.6 stars from 226 reviews, lists Saturday hours).
Electrolux Washer Lines Technicians Work On
What a Electrolux Washer Technician Deals With
Supply pressure is specified at 30 to 120 psi with no more than about 10 psi difference between hot and cold, and the inlet connectors carry filters that can clog. Source: Electrolux - Laundry Water Supply Guide
Electrolux Washer Symptoms and First Checks
- Shaking, thumping or off balance. Confirm shipping bolts and foam were removed, level the washer on a solid floor, and redistribute or add a couple of similar items to an unbalanced load. Source: Electrolux - Laundry Washers Noises Guide
- Controls won't respond. A LOC display means the control lock is on; turn it off from the control lock option before starting a cycle. Source: Electrolux - Front loading washer Error Code LOC control lock activator
Reading a Electrolux Washer Error Code
| Code | What it means |
|---|---|
| HO SE | The hot and cold inlet hoses are connected to the wrong inlets. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection |
| E35 | The pressure sensor detects a water overfill. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill |
| E41 | The control board reads the door switch as open. Source: Electrolux - Front loading washer Error Code E41 door is open |
Signs Your Electrolux Washer Needs a Technician
- Washer will not start or the lid or door stays locked
- Washer fills slowly, will not fill, or keeps filling
- Water on the floor under or in front of the washer
Inside a Washer Repair Visit
Care Electrolux Recommends for Its Washers
- Connect the washer with new fill hoses and rubber washers, swap flood-safe hoses for standard washer hoses, and hand-tighten plus about two-thirds of a turn without cross-threading. Source: Electrolux - Laundry Water Supply Guide
- Use high-efficiency (HE) detergent, keep each dispenser compartment below its max fill line, and put detergent packs in the drum rather than the dispenser. Source: Electrolux - Laundry Washers Detergent Guide
Electrolux Washer Repair Cost Ranges
A Electrolux washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- How old the washer is
- Where the washer drains (standpipe or laundry sink)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Laundry Notes for Globe, AZ
Most washer calls in Globe come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Arizona has no appliance-repair-specific license; work is regulated through Registrar of Contractors classifications, and state law removes the small-job (under $1,000) handyman exemption for any work connecting or repairing appliances on natural gas or propane. Source: A.R.S. 32-1121 - Persons not required to be licensed
In Arizona, you can check a license with the Arizona Registrar of Contractors Contractor Search or report a problem to the Arizona Attorney General Consumer Protection.
Hiring a Washer Repair Company in Globe
- What is the service call or diagnostic fee, and is it applied to the repair?
- How often do you repair Electrolux washers, and how quickly can you get parts?
- Will you check the drain pump filter and drain hose before replacing the pump?
Electrolux Washer Repair FAQs: Globe, AZ
Why won't my washer spin?
Which Globe technicians work on Electrolux?
Should I repair or replace my Electrolux washer?
What should I do about a Electrolux error code?
More Washing Machine Repair in Globe, AZ
Electrolux Washer Repair Near Globe
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Electrolux repair.