Most Kenmore washer repairs in Syracuse involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Syracuse list starts with companies that name Kenmore, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Kenmore, and the technicians listed are independent repair companies, not the manufacturer.
With a Kenmore washer, the model number matters more than the badge: it tells a technician exactly which parts and repair steps apply. Find it on the label before you call.
Independent Kenmore Washer Technicians, Syracuse UT
We found 40 appliance repair companies within 30 miles of Syracuse. 1 of them are based in Syracuse itself, and other nearby bases include Salt Lake City (15), Clearfield (3), and Ogden (3). Distances run up to about 26 miles. No company within 90 miles of Syracuse mentions Kenmore by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Nearest on the list: Same Hour Appliance Repair, around 1.7 miles out. Across 28 rated companies, the average public rating is 4.5 stars.
Companies are shown by relevance and distance from Syracuse. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Repair companies inside 30 miles | 60 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 19 |
| Open on Saturdays (per listing) | 41 |
| Mention Kenmore | 0 |
| Distance to the three closest (mi) | 1.7, 3.0, 3.0 |
| Name washers or washing machines in their listing | 4 |
Closest matches for Syracuse: Dick Kearsley Service Center (3.0 miles away, based in Clearfield, 4.6 stars from 609 reviews, lists Saturday hours); iFiX, LLC (6.4 miles away, based in Riverdale, 4.9 stars from 436 reviews); Precision Appliance Installs (8.2 miles away, based in Kaysville, 5.0 stars from 38 reviews); Ebenezer Appliance Repair (10.2 miles away, based in Ogden, 4.7 stars from 25 reviews).
Kenmore Washer Lines and Features
How Kenmore Washers Are Built
Select models include Deep Fill or water level control, which raises or lowers the fill level beyond the automatic setting. Source: Kenmore - Laundry Helper: Kenmore Washer Buying Guide
Front load models use Smart Motion, where the control varies drum movement to produce up to six different wash motions. Source: Kenmore - Laundry Helper: Kenmore Washer Buying Guide
Signs Your Kenmore Washer Needs a Technician
- An error code on the display
- Loud banging, shaking or walking during the spin
- Washer fills slowly, will not fill, or keeps filling
What a Washing Machine Technician Checks
Care Kenmore Recommends for Its Washers
- Check the hoses behind the washer regularly for cracks, bulges or drips, and replace them about every five years. Source: Kenmore - Appliance Maintenance Tips to Help Maximize Efficiency
- Avoid packing in extra-large loads and follow the detergent maker's dosing for each load. Source: Kenmore - Tips for Washing Extra Large Loads of Laundry
Brand guides: Kenmore Washer Not Draining or Spinning: Fixes.
What Kenmore Washer Repairs Cost
A Kenmore washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- How old the washer is
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Around Syracuse
Most washer calls in Syracuse come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Before You Book in Syracuse
- How often do you repair Kenmore washers, and how quickly can you get parts?
- If the washer is leaking, will you find where the water starts before quoting a part?
- Is your company licensed where my state requires it, and insured?
Kenmore Washer Repair FAQs: Syracuse, UT
What stops a washer from spinning?
Why is my washer leaking?
Is this Kenmore customer service?
Related Repair Pages for Syracuse
Kenmore Washer Repair in Nearby Cities
Before you call, find the model and serial number on your Kenmore washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.