A Kenmore washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. The Layton list starts with companies that name Kenmore, followed by other appliance repair companies that work on washers.
Washing Machine Repair Near Me is independent and not affiliated with Kenmore. Listed companies are independent technicians who repair Kenmore washers and other brands.
With a Kenmore washer, the model number matters more than the badge: it tells a technician exactly which parts and repair steps apply. Find it on the label before you call.
Kenmore Washer Repair Near Layton
Within 30 miles of Layton there are 40 appliance repair companies in our data. 2 list an address in Layton, and the rest are spread across Salt Lake City (15), Clearfield (3), and Ogden (3). The farthest listed company is about 24 miles out. Nearest on the list: All Day Appliance Service, around 1.0 miles out. No company within 90 miles of Layton mentions Kenmore by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 4.5 stars across 28 businesses.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| With 4.5+ stars and at least 10 reviews | 18 |
|---|---|
| Mention washer work | 4 |
| Mention Kenmore | 0 |
| Repair companies inside 30 miles | 60 |
| Three nearest companies, miles away | 1.0, 1.8, 3.2 |
| Open on Saturdays (per listing) | 41 |
The leading options for Layton are Precision Appliance Installs (3.2 miles away, based in Kaysville, 5.0 stars from 38 reviews); Dick Kearsley Service Center (3.6 miles away, based in Clearfield, 4.6 stars from 609 reviews, lists Saturday hours); iFiX, LLC (7.0 miles away, based in Riverdale, 4.9 stars from 436 reviews); Charlie Fuller's Appliance (14.4 miles away, based in Woods Cross, 4.8 stars from 247 reviews, lists Saturday hours).
Know Your Kenmore Washer
What a Kenmore Washer Technician Deals With
Some top load models use an adaptive motor that adjusts its power to each load. Source: Kenmore - Life Your Way Loves Kenmore Top Load Laundry
Signs Your Kenmore Washer Needs a Technician
- Water on the floor under or in front of the washer
- Washer will not start or the lid or door stays locked
- Washer will not spin, or clothes come out soaking wet
Inside a Washer Repair Visit
Care Kenmore Recommends for Its Washers
- Use a level to confirm the washer sits evenly and adjust the feet if it does not. Source: Kenmore - Appliance Maintenance Tips to Help Maximize Efficiency
- Smart models alert the owner when it is time to run the washer cleaning cycle. Source: Kenmore - 5 things you didn't know a Kenmore smart washer and dryer could do
Brand guides: Kenmore Washer Not Draining or Spinning: Fixes.
What Kenmore Washer Repairs Cost
A Kenmore washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Kenmore Washer Call
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Any error code shown on the display
Around Layton
Most washer calls in Layton come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Questions to Ask a Layton Washer Technician
- If a part has to be ordered, how soon can you come back to finish?
- What is the service call or diagnostic fee, and is it applied to the repair?
- Do you work on front-load and top-load washers, or only one type?
Kenmore Washer Repair FAQs: Layton, UT
Why does my front-load washer smell?
Where is the water under my washer coming from?
Why won't my washer spin?
Other Washer Repair in Layton
More Kenmore Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Kenmore repair.