Most Kenmore washer repairs in Moab involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Moab list starts with companies that name Kenmore, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Kenmore, and the technicians listed are independent repair companies, not the manufacturer.
If you bought your Kenmore at Sears, you do not need to go back to Sears for a repair. Independent technicians near Moab work on Kenmore washers regularly.
Kenmore Washer Repair Near Moab
Our data shows 6 appliance repair companies inside a 63-mile radius of Moab. 1 list an address in Moab, and the rest are spread across Grand Junction (5). The farthest listed company is about 63 miles out. None of the repair companies near Moab name Kenmore in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The closest is Appliances 4 Less Moab, about 2.7 miles away. Across 5 rated companies, the average public rating is 4.5 stars. Moab is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Companies within 63 miles | 6 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 1 |
| Name washers or washing machines in their listing | 2 |
| Open on Saturdays (per listing) | 3 |
| Mention Kenmore | 0 |
| Three nearest companies, miles away | 2.7, 61.0, 61.5 |
First up for Moab: Appliances 4 Less Moab (2.7 miles away, 5.0 stars from 9 reviews, lists Saturday hours); Century Appliance, LLC (61.0 miles away, based in Grand Junction, 4.4 stars from 108 reviews); Sears Appliance Repair (62.4 miles away, based in Grand Junction, lists Saturday hours); All Temp Services Inc. (61.5 miles away, based in Grand Junction, 4.9 stars from 18 reviews).
Kenmore Washer Lines Technicians Work On
What a Kenmore Washer Technician Deals With
Sensor-equipped models estimate load size and soil level and adjust water and detergent to match. Source: Kenmore - 5 things you didn't know a Kenmore smart washer and dryer could do
When to Call for Kenmore Washer Repair
- Water on the floor under or in front of the washer
- Burning smell or a motor that hums without turning
- An error code on the display
What a Washing Machine Technician Checks
Care Kenmore Recommends for Its Washers
- Avoid packing in extra-large loads and follow the detergent maker's dosing for each load. Source: Kenmore - Tips for Washing Extra Large Loads of Laundry
- Smart models alert the owner when it is time to run the washer cleaning cycle. Source: Kenmore - 5 things you didn't know a Kenmore smart washer and dryer could do
Brand guides: Kenmore Washer Not Draining or Spinning: Fixes.
Kenmore Washer Repair Cost Ranges
A Kenmore washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
What Moab Owners Should Know
Most washer calls in Moab come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Questions to Ask a Moab Washer Technician
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Can you give a written estimate before ordering parts?
- Do you work on front-load and top-load washers, or only one type?
Kenmore Washer Repair FAQs: Moab, UT
Should I repair or replace my Kenmore washer?
Do you work for Kenmore?
Why is my washer leaking?
Which Moab technicians work on Kenmore?
Related Repair Pages for Moab
Kenmore Washer Repair Near Moab
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Kenmore repair.