Most Electrolux washer repairs in Fort Collins involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Fort Collins list starts with companies that name Electrolux, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Electrolux. If your washer is still under manufacturer coverage, contact Electrolux directly.
Who Works on Electrolux Washers Near Fort Collins
Our data shows 39 appliance repair companies inside a 30-mile radius of Fort Collins. 15 list an address in Fort Collins, and other nearby bases include Loveland (8), Longmont (7), and Johnstown (3). Distances run up to about 28 miles. The closest is Cornerstone Appliance Repair LLC, about 0.3 miles away. No company within 90 miles of Fort Collins mentions Electrolux by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Across 36 rated companies, the average public rating is 4.6 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| With 4.5+ stars and at least 10 reviews | 14 |
|---|---|
| Mention washer work | 6 |
| Companies within 30 miles | 39 |
| Listing Saturday hours | 23 |
| Mention Electrolux | 0 |
| Distance to the three closest (mi) | 0.3, 0.4, 0.6 |
The leading options for Fort Collins are Manweiler Appliance (9.7 miles away, based in Windsor, 4.9 stars from 649 reviews, lists Saturday hours); Mr. Appliance of Northern Colorado (9.9 miles away, based in Loveland, 4.8 stars from 1,832 reviews); NoCo Appliance (9.6 miles away, based in Loveland, 4.9 stars from 30 reviews); Jim & Dave's Appliance (11.2 miles away, based in Loveland, 4.8 stars from 1,108 reviews).
Electrolux sells front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Electrolux Washer Lines Technicians Work On
What a Electrolux Washer Technician Deals With
Water level is monitored by a pressure sensor, which raises E35 when it reads an overfill condition. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill
Common Electrolux Washer Problems
- Controls won't respond. A LOC display means the control lock is on; turn it off from the control lock option before starting a cycle. Source: Electrolux - Front loading washer Error Code LOC control lock activator
- Washer not filling. Leave the unit powered through the temporary lockout, then check that hot and cold lines are not swapped and the water supply meets the guide's requirements. Source: Electrolux - Front loading washer Error Code E11 long fill time
Electrolux Washer Error Codes
| Code | What it means |
|---|---|
| HO SE | The hot and cold inlet hoses are connected to the wrong inlets. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection |
| E21 | Long pump-out time; water is not leaving the tub fast enough. Source: Electrolux - Front loading washer Error Code E21 long pump out time |
| E41 | The control board reads the door switch as open. Source: Electrolux - Front loading washer Error Code E41 door is open |
Signs Your Electrolux Washer Needs a Technician
- Washer fills slowly, will not fill, or keeps filling
- Grinding or roaring noise that rises with spin speed
- Musty or mildew smell from the drum or door seal
Inside a Washer Repair Visit
Keeping a Electrolux Washer Running
- Use high-efficiency (HE) detergent, keep each dispenser compartment below its max fill line, and put detergent packs in the drum rather than the dispenser. Source: Electrolux - Laundry Washers Detergent Guide
- Flush each faucet before hooking up the hoses so debris does not clog the inlet valve screens. Source: Electrolux - Laundry Water Supply Guide
Budgeting for a Electrolux Washer Repair
A Electrolux washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Electrolux Washer Call
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Local Notes for Fort Collins
Fort Collins Utilities, which supplies Fort Collins, reports hardness of no number published; the utility describes its source water as naturally soft with low mineral content. Hard water leaves scale on washer inlet screens and heating parts and calls for the right detergent dose, which is worth mentioning when you book a repair. Source: Fort Collins Utilities: 2025 Water Quality Report
Colorado's Division of Professions and Occupations has no appliance repair license; its trade licenses cover plumbing and electrical work. Source: Occupational Professions (Colorado DORA Division of Professions and Occupations)
In Colorado, you can check a license with the Colorado DORA License Lookup or report a problem to the Colorado Attorney General, Consumer Protection.
How to Choose a Washing Machine Technician Near Fort Collins
- Will you check the drain pump filter and drain hose before replacing the pump?
- Do you work on front-load and top-load washers, or only one type?
- Is your company licensed where my state requires it, and insured?
Electrolux Washer Repair FAQs: Fort Collins, CO
Why won't my washer spin?
Is this Electrolux customer service?
Should I repair or replace my Electrolux washer?
Why is my washer leaking?
Other Washer Repair in Fort Collins
More Electrolux Washer Repair Pages Nearby
Before you call, find the model and serial number on your Electrolux washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.