Most Electrolux washer repairs in Evans involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. We flag companies whose listing or website mentions Electrolux and fill in with nearby appliance repair companies so you always have options.
Washing Machine Repair Near Me is independent and not affiliated with Electrolux. Listed companies are independent technicians who repair Electrolux washers and other brands.
Who Works on Electrolux Washers Near Evans
Our data shows 40 appliance repair companies inside a 30-mile radius of Evans. The rest are spread across Fort Collins (15), Loveland (8), and Longmont (7). The farthest listed company is about 29 miles out. The closest is Sears Appliance Repair, about 2.2 miles away. None of the repair companies near Evans name Electrolux in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The 37 rated companies in range average 4.6 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| With 4.5+ stars and at least 10 reviews | 16 |
|---|---|
| Listing Saturday hours | 25 |
| Repair companies inside 30 miles | 41 |
| Three nearest companies, miles away | 2.2, 4.6, 7.1 |
| Mention Electrolux | 0 |
| Name washers or washing machines in their listing | 9 |
First up for Evans: Manweiler Appliance (11.7 miles away, based in Windsor, 4.9 stars from 649 reviews, lists Saturday hours); Mr. Appliance of Northern Colorado (16.3 miles away, based in Loveland, 4.8 stars from 1,832 reviews); Columbine Appliance & Fireplaces (28.5 miles away, based in Erie, 4.8 stars from 2,693 reviews, lists Saturday hours); Elevation Appliance and Fireplace (23.3 miles away, based in Frederick, 5.0 stars from 167 reviews).
Know which Electrolux washer you have before you call. Electrolux makes front-load models, and the technician will ask.
Electrolux Washer Lines Technicians Work On
How Electrolux Washers Are Built
The washer can detect hot and cold inlet hoses connected backward and shows HO SE until they are swapped; reversed lines are also listed as a cause of long-fill and long-drain codes. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection
The drain standpipe should be no taller than 96 inches and at least 1-1/4 inches across, and a hose sealed airtight into the standpipe can slow draining. Source: Electrolux - What should I do if my washer is draining slowly?
Common Electrolux Washer Problems
- Door won't lock / door error. Make sure the door shuts fully with nothing caught in it, listen for the latch click, and check the latch and striker. Source: Electrolux - Front loading washer Error Code E41 door is open
- Washer draining slowly. Clear kinks or clogs in the drain hose, check standpipe height and diameter, loosen any airtight tape seal, and avoid overdosing detergent. Source: Electrolux - What should I do if my washer is draining slowly?
What Electrolux Washer Codes Mean
| Code | What it means |
|---|---|
| LOC | The control lock is on, so cycles cannot be started until it is turned off. Source: Electrolux - Front loading washer Error Code LOC control lock activator |
| E42 | The door lock is not being recognized. Source: Electrolux - Front loading washer Error Code E42 door lock device failure |
| E41 | The control board reads the door switch as open. Source: Electrolux - Front loading washer Error Code E41 door is open |
Signs Your Electrolux Washer Needs a Technician
- Loud banging, shaking or walking during the spin
- Washer will not spin, or clothes come out soaking wet
- Water on the floor under or in front of the washer
Inside a Washer Repair Visit
Owner Care for Electrolux Washers
- Connect the washer with new fill hoses and rubber washers, swap flood-safe hoses for standard washer hoses, and hand-tighten plus about two-thirds of a turn without cross-threading. Source: Electrolux - Laundry Water Supply Guide
- Flush each faucet before hooking up the hoses so debris does not clog the inlet valve screens. Source: Electrolux - Laundry Water Supply Guide
Budgeting for a Electrolux Washer Repair
Most Electrolux washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
What Evans Owners Should Know
Most washer calls in Evans come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Colorado's Division of Professions and Occupations has no appliance repair license; its trade licenses cover plumbing and electrical work. Source: Occupational Professions (Colorado DORA Division of Professions and Occupations)
In Colorado, you can check a license with the Colorado DORA License Lookup or report a problem to the Colorado Attorney General, Consumer Protection.
Before You Book in Evans
- Can you give a written estimate before ordering parts?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- What is the service call or diagnostic fee, and is it applied to the repair?
Electrolux Washer Repair FAQs: Evans, CO
How do I get rid of a washer mildew smell?
Is this Electrolux customer service?
Where is the water under my washer coming from?
What should I do about a Electrolux error code?
More Washing Machine Repair in Evans, CO
Electrolux Washer Repair in Nearby Cities
Before you call, find the model and serial number on your Electrolux washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.