If your Electrolux washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Colorado Springs list starts with companies that name Electrolux, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Electrolux, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Electrolux Washers Near Colorado Springs
37 repair companies serve Colorado Springs from within 30 miles. 32 of them are based in Colorado Springs itself, and the rest are spread across Manitou Springs (2), Monument (1), and Woodland Park (1). None of the repair companies near Colorado Springs name Electrolux in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Appliance Service Co is the nearest, roughly 1.4 miles from Colorado Springs. The 33 rated companies in range average 4.4 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Three nearest companies, miles away | 1.4, 1.4, 2.1 |
|---|---|
| Mention Electrolux | 0 |
| Mention washer work | 9 |
| Open on Saturdays (per listing) | 26 |
| Appliance repair companies in range (30 mi) | 37 |
| Rated 4.5 stars or higher (10+ reviews) | 13 |
Closest matches for Colorado Springs: D3/A-OK Appliance Service, Inc. (2.2 miles away, 4.7 stars from 4,697 reviews); Dakine Appliance Repair (6.9 miles away, 4.9 stars from 1,286 reviews); Mr. Appliance of the Front Range (4.1 miles away, 4.9 stars from 1,710 reviews); Reliable Appliance (3.9 miles away, 4.7 stars from 575 reviews, lists Saturday hours).
Know Your Electrolux Washer
What a Electrolux Washer Technician Deals With
Supply pressure is specified at 30 to 120 psi with no more than about 10 psi difference between hot and cold, and the inlet connectors carry filters that can clog. Source: Electrolux - Laundry Water Supply Guide
The washer can detect hot and cold inlet hoses connected backward and shows HO SE until they are swapped; reversed lines are also listed as a cause of long-fill and long-drain codes. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection
What Electrolux Says to Check First
- Washer not filling. Leave the unit powered through the temporary lockout, then check that hot and cold lines are not swapped and the water supply meets the guide's requirements. Source: Electrolux - Front loading washer Error Code E11 long fill time
- Washer not draining. Straighten any kinked drain hose first, then confirm the hot and cold supply lines are not reversed and the drain hose is installed per the manual. Source: Electrolux - Front loading washer Error Code E21 long pump out time
Electrolux Washer Error Codes
| Code | What it means |
|---|---|
| E11 | Long fill time; the washer is not filling during the wash phase. Source: Electrolux - Front loading washer Error Code E11 long fill time |
| LOC | The control lock is on, so cycles cannot be started until it is turned off. Source: Electrolux - Front loading washer Error Code LOC control lock activator |
| E21 | Long pump-out time; water is not leaving the tub fast enough. Source: Electrolux - Front loading washer Error Code E21 long pump out time |
When to Call for Electrolux Washer Repair
- Grinding or roaring noise that rises with spin speed
- Water on the floor under or in front of the washer
- Water left in the drum after the cycle
What a Washing Machine Technician Checks
Owner Care for Electrolux Washers
- Flush each faucet before hooking up the hoses so debris does not clog the inlet valve screens. Source: Electrolux - Laundry Water Supply Guide
- Use high-efficiency (HE) detergent, keep each dispenser compartment below its max fill line, and put detergent packs in the drum rather than the dispenser. Source: Electrolux - Laundry Washers Detergent Guide
What Electrolux Washer Repairs Cost
Most Electrolux washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- How old the washer is
Local Notes for Colorado Springs
Most washer calls in Colorado Springs come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Colorado's Division of Professions and Occupations has no appliance repair license; its trade licenses cover plumbing and electrical work. Source: Occupational Professions (Colorado DORA Division of Professions and Occupations)
In Colorado, you can check a license with the Colorado DORA License Lookup or report a problem to the Colorado Attorney General, Consumer Protection.
Hiring a Washer Repair Company in Colorado Springs
- Will you check the drain pump filter and drain hose before replacing the pump?
- Can you give a written estimate before ordering parts?
- What guarantee do you give on parts and labor?
Electrolux Washer Repair FAQs: Colorado Springs, CO
Why does my Electrolux washer show an error code?
How do I get rid of a washer mildew smell?
Where is the water under my washer coming from?
Is my Electrolux washer worth repairing?
More Washing Machine Repair in Colorado Springs, CO
Electrolux Washer Repair in Nearby Cities
Electrolux Washer Repair for Towns Near Colorado Springs
Electrolux washer repair for Manitou Springs and Air Force Academy is handled by the same companies listed for Colorado Springs. Each town also has its own washing machine repair page with the nearest companies:
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Electrolux repair.