Most Amana washer repairs in Evans involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. We flag companies whose listing or website mentions Amana and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with Amana, and the technicians listed are independent repair companies, not the manufacturer.
Amana Washer Repair Near Evans
Our data shows 40 appliance repair companies inside a 30-mile radius of Evans. The rest are spread across Fort Collins (15), Loveland (8), and Longmont (7). The closest is Sears Appliance Repair, about 2.2 miles away. No company within 90 miles of Evans mentions Amana by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 37 rated companies in range average 4.6 stars.
Companies are shown by relevance and distance from Evans. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Rated 4.5 stars or higher (10+ reviews) | 16 |
|---|---|
| Mention Amana | 0 |
| Open on Saturdays (per listing) | 25 |
| Companies within 30 miles | 41 |
| Name washers or washing machines in their listing | 9 |
| Three nearest companies, miles away | 2.2, 4.6, 7.1 |
First up for Evans: Mr. Appliance of Northern Colorado (16.3 miles away, based in Loveland, 4.8 stars from 1,832 reviews); Manweiler Appliance (11.7 miles away, based in Windsor, 4.9 stars from 649 reviews, lists Saturday hours); NoCo Appliance (16.6 miles away, based in Loveland, 4.9 stars from 30 reviews); Columbine Appliance & Fireplaces (28.5 miles away, based in Erie, 4.8 stars from 2,693 reviews, lists Saturday hours).
Amana sells top-load agitator washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Amana Washer Lines and Features
How Amana Washers Are Built
Amana gives a drainpipe height range of 30 inches minimum to 96 inches maximum, and above the maximum, water can flow back into the washer. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
Shipping bolts hold the drum during transport and must come out after installation, or the washer will vibrate and walk. Source: Amana - Washer is Vibrating, Walking or Moving
Amana Washer Symptoms and First Checks
- Washer not draining or not spinning. Amana's checks include a closed lid, a balanced and not overloaded load, excess suds from too much detergent, a kinked or clogged drain hose, and the drainpipe height. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
- Washer shaking or walking. Amana says to spread the load evenly, make sure the shipping bolts were removed, and adjust the feet until all four touch the floor and the washer doesn't rock. Source: Amana - Washer is Vibrating, Walking or Moving
Amana Washer Error Codes
| Code | What it means |
|---|---|
| HC | Top load: the hot and cold inlet hoses are connected backward. Source: Amana - Error Codes in Top Load HE Washers |
| LOC / LC | Front load: control lock is on. Source: Amana - Error Codes in Front Load Washers |
| Ofb | Top load: the load is unbalanced, and the washer will try to rebalance it on its own. Source: Amana - Error Codes in Top Load HE Washers |
Amana Washer Problems Worth a Service Call
- Water on the floor under or in front of the washer
- Musty or mildew smell from the drum or door seal
- Washer fills slowly, will not fill, or keeps filling
Inside a Washer Repair Visit
Owner Care for Amana Washers
- On front loaders, wipe the door seal clean and dry its folds, take wet clothes out promptly, and leave the door open between uses. Source: Amana - Cleaning a Front Load Washer Door Seal
- With the water supply turned off, check the inlet screens on the water valve and brush them clean with mild soapy water, leaving the screens in place. Source: Amana - Checking the Fill Hoses if the Washer is not Filling
Budgeting for a Amana Washer Repair
A Amana washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- How old the washer is
- Any error code shown on the display
- Where the washer drains (standpipe or laundry sink)
Around Evans
Most washer calls in Evans come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Colorado's Division of Professions and Occupations has no appliance repair license; its trade licenses cover plumbing and electrical work. Source: Occupational Professions (Colorado DORA Division of Professions and Occupations)
In Colorado, you can check a license with the Colorado DORA License Lookup or report a problem to the Colorado Attorney General, Consumer Protection.
Before You Book in Evans
- Is your company licensed where my state requires it, and insured?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- What is the service call or diagnostic fee, and is it applied to the repair?
Amana Washer Repair FAQs: Evans, CO
What stops a washer from spinning?
Why does my Amana washer show an error code?
Why is my washer leaking?
Why does my front-load washer smell?
Other Washer Repair in Evans
More Amana Washer Repair Pages Nearby
Before you call, find the model and serial number on your Amana washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.