Whirlpool owners in Pullman usually want two things from a repair company: experience with the brand and quick access to parts. The Pullman list starts with companies that name Whirlpool, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Whirlpool, and the technicians listed are independent repair companies, not the manufacturer.
Independent Whirlpool Washer Technicians, Pullman WA
Within 60 miles of Pullman there are 11 appliance repair companies in our data. The rest are spread across Lewiston (7), Clarkston (2), and Moscow (1). The farthest listed company is about 27 miles out. Sears Appliance Repair is the nearest, roughly 8.8 miles from Pullman. None of the repair companies near Pullman name Whirlpool in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Rated companies nearby average 4.4 stars across 10 businesses. Because the nearest shops are farther out, ask each company whether Pullman is inside its regular service area.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Listing Saturday hours | 5 |
|---|---|
| Repair companies inside 60 miles | 11 |
| Rated 4.5 stars or higher (10+ reviews) | 4 |
| Mention washer work | 4 |
| Mention Whirlpool | 0 |
| Three nearest companies, miles away | 8.8, 22.7, 22.7 |
First up for Pullman: Lewiston MW & Appliance; (25.5 miles away, based in Lewiston, 5.0 stars from 20 reviews); Sears Appliance Repair (8.8 miles away, based in Moscow, 4.3 stars from 28 reviews, lists Saturday hours); CM Appliance Repair (27.5 miles away, based in Lewiston, 4.8 stars from 112 reviews); Sears Appliance Repair (24.3 miles away, based in Lewiston, 4.4 stars from 39 reviews, lists Saturday hours).
Know Your Whirlpool Washer
What a Whirlpool Washer Technician Deals With
Some front load models have an owner-accessible drain pump filter at the lower front of the cabinet, usually reached by removing a small access panel or drawer. Source: Whirlpool - Cleaning the Pump Filter - Front Load Washer
High-efficiency Whirlpool washers need HE detergent only, because excess suds can stop the pump from draining and the drum from spinning. Source: Whirlpool - HE Detergent use in a Washer
Whirlpool Washer Symptoms and First Checks
- Washer not draining. Confirm the lid or door is fully latched, then look for kinks or clogs in the drain hose and make sure the standpipe height is within range. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
- Washer smells. Run the Clean Washer cycle monthly, use only HE detergent, take clothes out promptly, and leave the door open between loads. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
Reading a Whirlpool Washer Error Code
| Code | What it means |
|---|---|
| F7 E1 | Motor speed sensing problem; check that shipping bolts are removed and the washer is not overloaded. Source: Whirlpool - Error Codes in Front Load Washers |
| rL / F34 | Items were left in the drum when the Clean Washer cycle was started. Source: Whirlpool - Error Codes in Front Load Washers |
| Int | The cycle was paused or canceled, and the washer may drain and spin for a while before it stops. Source: Whirlpool - Error Codes in Front Load Washers |
When to Call for Whirlpool Washer Repair
- Water on the floor under or in front of the washer
- Washer will not spin, or clothes come out soaking wet
- Loud banging, shaking or walking during the spin
What a Washing Machine Technician Checks
Owner Care for Whirlpool Washers
- Clean the front load drain pump filter every few months or whenever lint builds up, on models that have one. Source: Whirlpool - Cleaning the Pump Filter - Front Load Washer
- Leave the front load door ajar between loads and remove wet clothes promptly so moisture can dry out. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
Budgeting for a Whirlpool Washer Repair
A Whirlpool washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Whirlpool Washer Call
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- How old the washer is
- Where the washer drains (standpipe or laundry sink)
What Pullman Owners Should Know
Most washer calls in Pullman come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Washington's Department of Labor & Industries issues an appliance repair (07D) specialty electrician certificate that covers like-for-like repair and replacement of self-contained appliances such as ovens on an unchanged circuit, but excludes branch-circuit wiring and plumbing work. Source: WAC 296-46B-920, Electrical/telecommunications license/certificate types and scope of work
In Washington, you can check a license with the L&I Verify a Contractor, Tradesperson or Business or report a problem to the Washington State Office of the Attorney General, Consumer Protection.
Before You Book in Pullman
- If a part has to be ordered, how soon can you come back to finish?
- What guarantee do you give on parts and labor?
- What is the service call or diagnostic fee, and is it applied to the repair?
Whirlpool Washer Repair FAQs: Pullman, WA
Which Pullman technicians work on Whirlpool?
Is this Whirlpool customer service?
How do I get rid of a washer mildew smell?
Other Washer Repair in Pullman
More Whirlpool Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Whirlpool repair.