Most Whirlpool washer repairs in Kennewick involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Kennewick, with those that mention Whirlpool first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Whirlpool, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Whirlpool Washers Near Kennewick
We found 16 appliance repair companies within 60 miles of Kennewick. 3 of them are based in Kennewick itself, and the rest are spread across Pasco (3), Walla Walla (3), and Richland (2). The farthest listed company is about 58 miles out. Nearest on the list: Kurios Repair, around 0.5 miles out. Of those, 1 mentions Whirlpool by name. Across 16 rated companies, the average public rating is 4.3 stars. Because the nearest shops are farther out, ask each company whether Kennewick is inside its regular service area.
Companies are shown by relevance and distance from Kennewick. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention washer work | 3 |
|---|---|
| Distance to the three closest (mi) | 0.5, 2.4, 2.4 |
| Open on Saturdays (per listing) | 10 |
| Rated 4.5 stars or higher (10+ reviews) | 8 |
| Companies within 60 miles | 16 |
| Mention Whirlpool | 1 |
At the top of the Kennewick list: Master's Appliance & Refrigeration, LLC (4.7 miles away, based in Pasco, 4.2 stars from 77 reviews); VSG Appliances (4.2 miles away, based in Pasco, 4.9 stars from 158 reviews, lists Saturday hours); Fred's Appliance (2.4 miles away, 4.1 stars from 731 reviews, lists Saturday hours); Smart Appliance Repair (8.1 miles away, based in Richland, 4.8 stars from 104 reviews, lists Saturday hours).
Whirlpool Washer Lines and Features
How Whirlpool Washers Are Built
Some models sense load size before filling, tumbling or spinning the drum briefly, and then set the water volume to match, so a partly filled tub is often normal. Source: Whirlpool - Why won't my washing machine fill with water
Common Whirlpool Washer Problems
- Washer won't start. Check that the washer is plugged in and the breaker has not tripped, turn off the control lock if it is on, and reset the washer by cutting power for at least a minute. Source: Whirlpool - How to reset a washing machine
- Washer leaking. Check that the inlet hoses have their rubber washers and snug connections at both ends, then make sure the drain hose is secure and the house drain is not backing up. Source: Whirlpool - Leaking Water Underneath - Washer
Reading a Whirlpool Washer Error Code
| Code | What it means |
|---|---|
| dEt | Detergent cartridge is not detected on models with a bulk dispenser. Source: Whirlpool - Error Codes in Front Load Washers |
| F9 E1 | Draining is taking longer than expected; check the drain hose and standpipe and avoid excess suds. Source: Whirlpool - Error Codes in Front Load Washers |
| Int | The cycle was paused or canceled, and the washer may drain and spin for a while before it stops. Source: Whirlpool - Error Codes in Front Load Washers |
Whirlpool Washer Problems Worth a Service Call
- Washer will not start or the lid or door stays locked
- Musty or mildew smell from the drum or door seal
- Water on the floor under or in front of the washer
Inside a Washer Repair Visit
Keeping a Whirlpool Washer Running
- Leave the front load door ajar between loads and remove wet clothes promptly so moisture can dry out. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
- Run the Clean Washer cycle once a month with affresh cleaner or regular liquid chlorine bleach to keep the washer fresh. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
Budgeting for a Whirlpool Washer Repair
Price the repair before replacing a Whirlpool washer. Published ranges for common jobs:
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Any error code shown on the display
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Laundry Notes for Kennewick, WA
Most washer calls in Kennewick come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Washington's Department of Labor & Industries issues an appliance repair (07D) specialty electrician certificate that covers like-for-like repair and replacement of self-contained appliances such as ovens on an unchanged circuit, but excludes branch-circuit wiring and plumbing work. Source: WAC 296-46B-920, Electrical/telecommunications license/certificate types and scope of work
In Washington, you can check a license with the L&I Verify a Contractor, Tradesperson or Business or report a problem to the Washington State Office of the Attorney General, Consumer Protection.
How to Choose a Washing Machine Technician Near Kennewick
- How often do you repair Whirlpool washers, and how quickly can you get parts?
- Will you check the drain pump filter and drain hose before replacing the pump?
- What is the service call or diagnostic fee, and is it applied to the repair?
Whirlpool Washer Repair FAQs: Kennewick, WA
Do you work for Whirlpool?
Why does my Whirlpool washer show an error code?
How do I find a technician who knows Whirlpool washers?
Why does my front-load washer smell?
More Washing Machine Repair in Kennewick, WA
Whirlpool Washer Repair in Nearby Cities
Before you call, find the model and serial number on your Whirlpool washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.