If your Electrolux washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. We flag companies whose listing or website mentions Electrolux and fill in with nearby appliance repair companies so you always have options.
Washing Machine Repair Near Me is independent and not affiliated with Electrolux. Listed companies are independent technicians who repair Electrolux washers and other brands.
Electrolux Washer Repair Near Kennewick
Within 60 miles of Kennewick there are 16 appliance repair companies in our data. 3 of them are based in Kennewick itself, and other nearby bases include Pasco (3), Walla Walla (3), and Richland (2). Kurios Repair is the nearest, roughly 0.5 miles from Kennewick. No company within 90 miles of Kennewick mentions Electrolux by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 16 rated companies in range average 4.3 stars. Because the nearest shops are farther out, ask each company whether Kennewick is inside its regular service area.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention washer work | 3 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 8 |
| Appliance repair companies in range (60 mi) | 16 |
| Three nearest companies, miles away | 0.5, 2.4, 2.4 |
| Mention Electrolux | 0 |
| Open on Saturdays (per listing) | 10 |
At the top of the Kennewick list: Fred's Appliance (2.4 miles away, 4.1 stars from 731 reviews, lists Saturday hours); UDG Services LLC (5.7 miles away, based in Richland, 4.9 stars from 142 reviews); VSG Appliances (4.2 miles away, based in Pasco, 4.9 stars from 158 reviews, lists Saturday hours); Master's Appliance & Refrigeration, LLC (4.7 miles away, based in Pasco, 4.2 stars from 77 reviews).
Know which Electrolux washer you have before you call. Electrolux makes front-load models, and the technician will ask.
Electrolux Washer Lines and Features
What a Electrolux Washer Technician Deals With
The washer can detect hot and cold inlet hoses connected backward and shows HO SE until they are swapped; reversed lines are also listed as a cause of long-fill and long-drain codes. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection
The drain standpipe should be no taller than 96 inches and at least 1-1/4 inches across, and a hose sealed airtight into the standpipe can slow draining. Source: Electrolux - What should I do if my washer is draining slowly?
Electrolux Washer Symptoms and First Checks
- Washer draining slowly. Clear kinks or clogs in the drain hose, check standpipe height and diameter, loosen any airtight tape seal, and avoid overdosing detergent. Source: Electrolux - What should I do if my washer is draining slowly?
- Washer not filling. Leave the unit powered through the temporary lockout, then check that hot and cold lines are not swapped and the water supply meets the guide's requirements. Source: Electrolux - Front loading washer Error Code E11 long fill time
What Electrolux Washer Codes Mean
| Code | What it means |
|---|---|
| HO SE | The hot and cold inlet hoses are connected to the wrong inlets. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection |
| E21 | Long pump-out time; water is not leaving the tub fast enough. Source: Electrolux - Front loading washer Error Code E21 long pump out time |
| E35 | The pressure sensor detects a water overfill. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill |
When to Call for Electrolux Washer Repair
- Washer will not start or the lid or door stays locked
- Musty or mildew smell from the drum or door seal
- Burning smell or a motor that hums without turning
How a Washer Service Call Usually Goes in Kennewick
Owner Care for Electrolux Washers
- Use high-efficiency (HE) detergent, keep each dispenser compartment below its max fill line, and put detergent packs in the drum rather than the dispenser. Source: Electrolux - Laundry Washers Detergent Guide
- Flush each faucet before hooking up the hoses so debris does not clog the inlet valve screens. Source: Electrolux - Laundry Water Supply Guide
Electrolux Washer Repair Cost Ranges
A Electrolux washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Where the washer drains (standpipe or laundry sink)
Local Notes for Kennewick
Most washer calls in Kennewick come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Washington's Department of Labor & Industries issues an appliance repair (07D) specialty electrician certificate that covers like-for-like repair and replacement of self-contained appliances such as ovens on an unchanged circuit, but excludes branch-circuit wiring and plumbing work. Source: WAC 296-46B-920, Electrical/telecommunications license/certificate types and scope of work
In Washington, you can check a license with the L&I Verify a Contractor, Tradesperson or Business or report a problem to the Washington State Office of the Attorney General, Consumer Protection.
Before You Book in Kennewick
- If a part has to be ordered, how soon can you come back to finish?
- Can you give a written estimate before ordering parts?
- Do you work on front-load and top-load washers, or only one type?
Electrolux Washer Repair FAQs: Kennewick, WA
What stops a washer from spinning?
Why does my Electrolux washer show an error code?
Where is the water under my washer coming from?
Related Repair Pages for Kennewick
Electrolux Washer Repair in Nearby Cities
Electrolux Washer Repair for Towns Near Kennewick
Electrolux washer repair for Finley is handled by the same companies listed for Kennewick. Each town also has its own washing machine repair page with the nearest companies:
Write down any error code your Electrolux washer shows and at what point in the cycle it appears. It helps a Kennewick technician bring the right parts.