Whirlpool owners in Burlington usually want two things from a repair company: experience with the brand and quick access to parts. The Burlington list starts with companies that name Whirlpool, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Whirlpool, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Whirlpool Washers Near Burlington
Within 30 miles of Burlington there are 12 appliance repair companies in our data. Other nearby bases include Bellingham (7), Arlington (2), and Marysville (2). Distances run up to about 28 miles. Expert Viking Appliance Repair is the nearest, roughly 20.2 miles from Burlington. No company within 90 miles of Burlington mentions Whirlpool by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 9 rated companies in range average 4.0 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Appliance repair companies in range (30 mi) | 12 |
|---|---|
| Three nearest companies, miles away | 20.2, 20.7, 21.0 |
| Rated 4.5 stars or higher (10+ reviews) | 4 |
| Mention Whirlpool | 0 |
| Mention washer work | 1 |
| Open on Saturdays (per listing) | 7 |
At the top of the Burlington list: A-Service: Heating, Cooling & Appliance Repair Arlington (23.7 miles away, based in Arlington, 4.9 stars from 170 reviews, lists Saturday hours); Brian's renewed (21.0 miles away, based in Bellingham, 4.6 stars from 18 reviews, lists Saturday hours); Appliance Repair Guys (23.1 miles away, based in Arlington, 5.0 stars from 26 reviews, lists Saturday hours); Sub Zero Appliance Repair (21.3 miles away, based in Bellingham, 4.3 stars from 90 reviews, lists Saturday hours).
Whirlpool Washer Lines Technicians Work On
How Whirlpool Washers Are Built
Both top and front load models will only run their spin when the lid or door switch registers the lid or door as fully closed and latched. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
Some front load models have an owner-accessible drain pump filter at the lower front of the cabinet, usually reached by removing a small access panel or drawer. Source: Whirlpool - Cleaning the Pump Filter - Front Load Washer
Common Whirlpool Washer Problems
- Washer not draining. Confirm the lid or door is fully latched, then look for kinks or clogs in the drain hose and make sure the standpipe height is within range. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
- Washer not spinning. Redistribute an unbalanced or overloaded load, cut back on detergent to avoid excess suds, and remember delicate cycles spin slowly. Source: Whirlpool - Front Load Washer is not Draining, not Spinning, or Leaving Wet Loads
What Whirlpool Washer Codes Mean
| Code | What it means |
|---|---|
| F9 E1 | Draining is taking longer than expected; check the drain hose and standpipe and avoid excess suds. Source: Whirlpool - Error Codes in Front Load Washers |
| dEt | Detergent cartridge is not detected on models with a bulk dispenser. Source: Whirlpool - Error Codes in Front Load Washers |
| LOC / LC | Control lock is turned on; touch or hold the Control Lock button to release it. Source: Whirlpool - Error Codes in Front Load Washers |
Signs Your Whirlpool Washer Needs a Technician
- Water left in the drum after the cycle
- Washer fills slowly, will not fill, or keeps filling
- Burning smell or a motor that hums without turning
What Gets Fixed on a Burlington Washer Call
Keeping a Whirlpool Washer Running
- Replace the water fill hoses about every five years. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
- Check and brush clean the small mesh screens where the fill hoses connect at the back of the washer if filling slows. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
Budgeting for a Whirlpool Washer Repair
A Whirlpool washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Whirlpool Washer Call
- How old the washer is
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Any error code shown on the display
Local Notes for Burlington
Most washer calls in Burlington come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Washington's Department of Labor & Industries issues an appliance repair (07D) specialty electrician certificate that covers like-for-like repair and replacement of self-contained appliances such as ovens on an unchanged circuit, but excludes branch-circuit wiring and plumbing work. Source: WAC 296-46B-920, Electrical/telecommunications license/certificate types and scope of work
In Washington, you can check a license with the L&I Verify a Contractor, Tradesperson or Business or report a problem to the Washington State Office of the Attorney General, Consumer Protection.
Questions to Ask a Burlington Washer Technician
- Is your company licensed where my state requires it, and insured?
- Do you work on front-load and top-load washers, or only one type?
- What is the service call or diagnostic fee, and is it applied to the repair?
Whirlpool Washer Repair FAQs: Burlington, WA
How do I find a technician who knows Whirlpool washers?
What stops a washer from spinning?
Where is the water under my washer coming from?
Why does my Whirlpool washer show an error code?
More Washing Machine Repair in Burlington, WA
Whirlpool Washer Repair in Nearby Cities
Before you call, find the model and serial number on your Whirlpool washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.