Most Whirlpool washer repairs in Gun Barrel City involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Gun Barrel City list starts with companies that name Whirlpool, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Whirlpool. If your washer is still under manufacturer coverage, contact Whirlpool directly.
Whirlpool Washer Repair Near Gun Barrel City
Within 60 miles of Gun Barrel City there are 40 appliance repair companies in our data. Other nearby bases include Mesquite (7), Dallas (5), and Rockwall (5). G & S Appliance Repair is the nearest, roughly 3.4 miles from Gun Barrel City. None of the companies within 60 miles mention Whirlpool by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. Rated companies nearby average 4.4 stars across 34 businesses. Gun Barrel City is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Listing Saturday hours | 31 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 24 |
| Mention Whirlpool | 0 |
| Name washers or washing machines in their listing | 13 |
| Three nearest companies, miles away | 3.4, 19.1, 24.6 |
| Appliance repair companies in range (60 mi) | 60 |
Closest matches for Gun Barrel City: Fast Whirlpool Appliance Repair (52.8 miles away, based in Garland, 4.3 stars from 35 reviews, lists Saturday hours); Sears Appliance Repair (19.1 miles away, based in Athens, 4.5 stars from 128 reviews, lists Saturday hours); Galo Appliance Repair (45.9 miles away, based in Garland, 4.9 stars from 507 reviews, lists Saturday hours); Mr. Appliance of East Texas (46.2 miles away, based in Tyler, 4.7 stars from 1,263 reviews).
Whirlpool sells top-load agitator, top-load impeller, front-load, all-in-one combo, and commercial washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Whirlpool Washer Lines and Features
How Whirlpool Washers Are Built
The drain hose must run to a standpipe between 30 and 96 inches tall, since a higher drain can let water flow back into the washer. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
What Whirlpool Says to Check First
- Washer not filling. Make sure both hot and cold supply valves are fully open, the fill hoses are not kinked, and the inlet screens are not clogged with sediment. Source: Whirlpool - Why won't my washing machine fill with water
- Washer leaking. Check that the inlet hoses have their rubber washers and snug connections at both ends, then make sure the drain hose is secure and the house drain is not backing up. Source: Whirlpool - Leaking Water Underneath - Washer
Whirlpool Washer Error Codes
| Code | What it means |
|---|---|
| LOC / LC | Control lock is turned on; touch or hold the Control Lock button to release it. Source: Whirlpool - Error Codes in Front Load Washers |
| F7 E1 | Motor speed sensing problem; check that shipping bolts are removed and the washer is not overloaded. Source: Whirlpool - Error Codes in Front Load Washers |
| F9 E1 | Draining is taking longer than expected; check the drain hose and standpipe and avoid excess suds. Source: Whirlpool - Error Codes in Front Load Washers |
Signs Your Whirlpool Washer Needs a Technician
- Water left in the drum after the cycle
- Washer will not spin, or clothes come out soaking wet
- Water on the floor under or in front of the washer
What Gets Fixed on a Gun Barrel City Washer Call
Keeping a Whirlpool Washer Running
- Replace the water fill hoses about every five years. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
- Check and brush clean the small mesh screens where the fill hoses connect at the back of the washer if filling slows. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
What Whirlpool Washer Repairs Cost
Price the repair before replacing a Whirlpool washer. Published ranges for common jobs:
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Any error code shown on the display
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
What Gun Barrel City Owners Should Know
Most washer calls in Gun Barrel City come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
How to Choose a Washing Machine Technician Near Gun Barrel City
- Will you check the drain pump filter and drain hose before replacing the pump?
- What guarantee do you give on parts and labor?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
Whirlpool Washer Repair FAQs: Gun Barrel City, TX
Why does my front-load washer smell?
Where is the water under my washer coming from?
Is this Whirlpool customer service?
What stops a washer from spinning?
More Washing Machine Repair in Gun Barrel City, TX
Whirlpool Washer Repair in Nearby Cities
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Whirlpool repair.