Most GE washer repairs in Gun Barrel City involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Gun Barrel City list starts with companies that name GE, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on GE Washers Near Gun Barrel City
40 repair companies serve Gun Barrel City from within 60 miles. Other nearby bases include Mesquite (7), Dallas (5), and Rockwall (5). G & S Appliance Repair is the nearest, roughly 3.4 miles from Gun Barrel City. No company within 90 miles of Gun Barrel City mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Across 34 rated companies, the average public rating is 4.4 stars. Because the nearest shops are farther out, ask each company whether Gun Barrel City is inside its regular service area.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Mention GE | 0 |
|---|---|
| Three nearest companies, miles away | 3.4, 19.1, 24.6 |
| Mention washer work | 13 |
| Companies within 60 miles | 60 |
| Rated 4.5 stars or higher (10+ reviews) | 24 |
| Open on Saturdays (per listing) | 31 |
The leading options for Gun Barrel City are Sears Appliance Repair (19.1 miles away, based in Athens, 4.5 stars from 128 reviews, lists Saturday hours); Mr. Appliance of East Texas (46.2 miles away, based in Tyler, 4.7 stars from 1,263 reviews); Galo Appliance Repair (45.9 miles away, based in Garland, 4.9 stars from 507 reviews, lists Saturday hours); Sears Appliance Repair (41.9 miles away, based in Waxahachie, 4.6 stars from 213 reviews, lists Saturday hours).
Know which GE washer you have before you call. GE makes top-load agitator, top-load impeller, front-load, and all-in-one combo models, and the technician will ask.
GE Washer Lines Technicians Work On
How GE Washers Are Built
On electronic top load models the lid locks automatically during parts of the cycle and stays locked until the basket has coasted to a full stop. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
Most front load models have a drain pump filter reachable at the bottom front of the cabinet, while models without front access need a technician to reach it. Source: GE Appliances - Front Load Washer - Troubleshooting
GE Washer Symptoms and First Checks
- Lid won't unlock. Wait for the basket to coast to a complete stop after spinning, since the lid stays locked until it does. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
- Washer off balance or shaking. Remove some items from an overfilled basket or spread bunched items evenly, then make sure the washer is level. Source: GE Appliances - Frequently Asked Questions About GE Washers
GE Washer Error Codes
| Code | What it means |
|---|---|
| H2O SUPPLY / IE | Water is not reaching the washer; check the house supply and that both valves are open. Source: GE Appliances - Washer - Consumer Help Indicator |
| UE | The load is unbalanced; spread the laundry evenly and make sure the washer is level. Source: GE Appliances - Washer - Consumer Help Indicator |
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
GE Washer Problems Worth a Service Call
- Washer fills slowly, will not fill, or keeps filling
- Washer will not start or the lid or door stays locked
- Water on the floor under or in front of the washer
What Gets Fixed on a Gun Barrel City Washer Call
Care GE Recommends for Its Washers
- Leave a top load lid up when the washer is not in use so the inside can dry out. Source: GE Appliances - Frequently Asked Questions About GE Washers
- On models with UltraFresh Vent, run the vent cycle at the end of each day you do laundry. Source: GE Appliances - Front Load Washer - UltraFresh Vent System with OdorBlock
Brand guides: GE Washer Not Draining or Spinning: What to Check.
GE Washer Repair Cost Ranges
Price the repair before replacing a GE washer. Published ranges for common jobs:
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a GE Washer Call
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Any error code shown on the display
What Gun Barrel City Owners Should Know
Most washer calls in Gun Barrel City come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Questions to Ask a Gun Barrel City Washer Technician
- If the washer is leaking, will you find where the water starts before quoting a part?
- Will you check the drain pump filter and drain hose before replacing the pump?
- How often do you repair GE washers, and how quickly can you get parts?
GE Washer Repair FAQs: Gun Barrel City, TX
What stops a washer from spinning?
Should I repair or replace my GE washer?
How do I get rid of a washer mildew smell?
Other Washer Repair in Gun Barrel City
GE Washer Repair Near Gun Barrel City
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a GE repair.