If your Whirlpool washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Granite Shoals list starts with companies that name Whirlpool, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Whirlpool, and the technicians listed are independent repair companies, not the manufacturer.
Whirlpool Washer Repair Near Granite Shoals
Our data shows 17 appliance repair companies inside a 30-mile radius of Granite Shoals. The rest are spread across Leander (6), Marble Falls (5), and Kingsland (1). The farthest listed company is about 30 miles out. Redwood Appliance Repair is the nearest, roughly 1.4 miles from Granite Shoals. None of the repair companies near Granite Shoals name Whirlpool in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The 17 rated companies in range average 4.4 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention Whirlpool | 0 |
|---|---|
| Repair companies inside 30 miles | 17 |
| With 4.5+ stars and at least 10 reviews | 10 |
| Open on Saturdays (per listing) | 13 |
| Distance to the three closest (mi) | 1.4, 5.0, 5.8 |
| Name washers or washing machines in their listing | 5 |
Closest matches for Granite Shoals: Highland Lakes Appliance Repair (7.2 miles away, based in Kingsland, 4.9 stars from 58 reviews, lists Saturday hours); Sears Appliance Repair (6.1 miles away, based in Marble Falls, 4.6 stars from 116 reviews, lists Saturday hours); America's Appliance Repair (29.9 miles away, based in Leander, 4.9 stars from 316 reviews, lists Saturday hours); Pacific Appliance Solutions INC (29.9 miles away, based in Leander, 5.0 stars from 90 reviews, lists Saturday hours).
Whirlpool sells top-load agitator, top-load impeller, front-load, all-in-one combo, and commercial washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your Whirlpool Washer
What Makes Whirlpool Washer Repairs Different
High-efficiency Whirlpool washers need HE detergent only, because excess suds can stop the pump from draining and the drum from spinning. Source: Whirlpool - HE Detergent use in a Washer
Some front load models have an owner-accessible drain pump filter at the lower front of the cabinet, usually reached by removing a small access panel or drawer. Source: Whirlpool - Cleaning the Pump Filter - Front Load Washer
Common Whirlpool Washer Problems
- Washer shaking or walking. Remove the shipping bolts, adjust the feet until all four sit firmly on the floor, and spread heavy and light items evenly in the drum. Source: Whirlpool - Washer is Vibrating, Walking or Moving
- Washer smells. Run the Clean Washer cycle monthly, use only HE detergent, take clothes out promptly, and leave the door open between loads. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
Whirlpool Washer Error Codes
| Code | What it means |
|---|---|
| dEt | Detergent cartridge is not detected on models with a bulk dispenser. Source: Whirlpool - Error Codes in Front Load Washers |
| F9 E1 | Draining is taking longer than expected; check the drain hose and standpipe and avoid excess suds. Source: Whirlpool - Error Codes in Front Load Washers |
| F7 E1 | Motor speed sensing problem; check that shipping bolts are removed and the washer is not overloaded. Source: Whirlpool - Error Codes in Front Load Washers |
When to Call for Whirlpool Washer Repair
- Washer will not start or the lid or door stays locked
- An error code on the display
- Water on the floor under or in front of the washer
How a Washer Service Call Usually Goes in Granite Shoals
Care Whirlpool Recommends for Its Washers
- Run the Clean Washer cycle once a month with affresh cleaner or regular liquid chlorine bleach to keep the washer fresh. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
- Check and brush clean the small mesh screens where the fill hoses connect at the back of the washer if filling slows. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
What Whirlpool Washer Repairs Cost
Price the repair before replacing a Whirlpool washer. Published ranges for common jobs:
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Whirlpool Washer Call
- How old the washer is
- Any error code shown on the display
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Laundry Notes for Granite Shoals, TX
Most washer calls in Granite Shoals come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
How to Choose a Washing Machine Technician Near Granite Shoals
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Do you work on front-load and top-load washers, or only one type?
- Is your company licensed where my state requires it, and insured?
Whirlpool Washer Repair FAQs: Granite Shoals, TX
Why won't my washer spin?
Why does my Whirlpool washer show an error code?
How do I find a technician who knows Whirlpool washers?
Other Washer Repair in Granite Shoals
Whirlpool Washer Repair Near Granite Shoals
Before you call, find the model and serial number on your Whirlpool washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.