Serving Granite Shoals, Texas and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Granite Shoals, TX

A local list of washer repair companies near Granite Shoals, TX, sorted by how closely they match the work, then by distance and public ratings.

Need washer repair in Granite Shoals?
One call connects you with a local technician who repairs front-load and top-load washers.
☎(866) 293-4411
✓12 companies listed for Granite Shoals✓Independent, not a manufacturer✓Public ratings & distances

Washers fail in fairly predictable ways, which is good news: many repairs are a single part that a technician can replace in one visit. Below are the companies within reach of Granite Shoals, sorted by how closely they match washing machine work, then by distance and public ratings.

Washer Technicians Serving Granite Shoals, TX

17 repair companies serve Granite Shoals from within 30 miles. Other nearby bases include Leander (6), Marble Falls (5), and Kingsland (1). Distances run up to about 30 miles. The closest is Redwood Appliance Repair, about 1.4 miles away. 5 list washing machine or washer work specifically. Rated companies nearby average 4.4 stars across 17 businesses.

Washer & Dryer Repair
Sears Appliance Repair
2603 N U.S. Hwy 281, Marble Falls, TX 78654
6.1 mi from Granite Shoals
★★★★½ 4.6 (116 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
America's Appliance Repair
239 Hoot Owl Ln N, Leander, TX 78641
29.9 mi from Granite Shoals
★★★★★ 4.9 (316 reviews)
Mentions washersSaturday hours
Appliance Repair
Highland Lakes Appliance Repair
1716 Purple Sage Ln, Kingsland, TX 78639
7.2 mi from Granite Shoals
★★★★★ 4.9 (58 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Pacific Appliance Solutions INC
2329 Lookout Range Dr, Leander, TX 78641
29.9 mi from Granite Shoals
★★★★★ 5.0 (90 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Mike Neat Refrigerator Repair
1017 Ranch Rd 620 S 2nd Floor, Ste 200, Austin, TX 78734
29.4 mi from Granite Shoals
★★★★½ 4.4 (10 reviews)
Mentions washersSaturday hours
Appliance Repair
Top-Notch Appliance Services & House of Parts
1510 Hwy 281 N #105, Marble Falls, TX 78654
5.8 mi from Granite Shoals
★★★★½ 4.5 (75 reviews)
Appliance Repair
ModCo Appliance Repair
1933 Mariann Dr, Leander, TX 78641
28.9 mi from Granite Shoals
★★★★★ 5.0 (346 reviews)
Saturday hours
Appliance Repair
Patriot Appliance & Air Conditioning Repair Service
3601 Venezia View, Leander, TX 78641
28.5 mi from Granite Shoals
★★★★★ 4.8 (605 reviews)
Saturday hours
Appliance Repair
ProStar Appliance Repair
1801 Pyramid Dr, Lakeway, TX 78734
29.4 mi from Granite Shoals
★★★★★ 5.0 (76 reviews)
Saturday hours
Appliance Repair
Naylor Services, LLC
1889 Co Rd 276, Bertram, TX 78605
25.9 mi from Granite Shoals
★★★★★ 5.0 (36 reviews)
Saturday hours
Appliance Repair
Redwood Appliance Repair
3520 Redwood Dr, Marble Falls, TX 78654
1.4 mi from Granite Shoals
★★★ 3.1 (8 reviews)
Saturday hours
Appliance Repair
Leander Appliance Repair
19101 Veranda Walk, Leander, TX 78645
25.9 mi from Granite Shoals
★★★★★ 5.0 (2 reviews)

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

Washer repair near Granite Shoals at a glance
With 4.5+ stars and at least 10 reviews10
Appliance repair companies in range (30 mi)17
Listing Saturday hours13
Mention washer work5
Mention a major washer brand0
Three nearest companies, miles away1.4, 5.0, 5.8

Closest matches for Granite Shoals: Sears Appliance Repair (6.1 miles away, based in Marble Falls, 4.6 stars from 116 reviews, lists Saturday hours); America's Appliance Repair (29.9 miles away, based in Leander, 4.9 stars from 316 reviews, lists Saturday hours); Highland Lakes Appliance Repair (7.2 miles away, based in Kingsland, 4.9 stars from 58 reviews, lists Saturday hours); Pacific Appliance Solutions INC (29.9 miles away, based in Leander, 5.0 stars from 90 reviews, lists Saturday hours).

⚡ Tell us what your washer is doing and we will connect you
☎(866) 293-4411

Washer Problems Worth a Service Call

  • Loud banging, shaking or walking during the spin
  • Water left in the drum after the cycle
  • Grinding or roaring noise that rises with spin speed
  • Water on the floor under or in front of the washer

Why Washing Machines Break Down

Suspension and bearingsShock absorbers, dampers and springs hold the tub steady during the spin. When they wear, the washer bangs and walks. Worn drum bearings make a rumbling or grinding noise that gets louder on the spin cycle.
Lid switches and door locksA washer will not fill, agitate or spin unless the lid switch or door lock tells the control the lid or door is shut and locked. A worn switch or failed lock is one of the most common parts replaced.
Belts, couplers and motorsDepending on the design, the motor turns the drum through a belt, a motor coupling or a direct-drive rotor. A worn belt, broken coupler or failed motor leaves the drum still while the washer hums or fills.

How a Washer Service Call Usually Goes in Granite Shoals

Controls and error codesElectronic washers report faults with codes. The technician reads the code and runs the brand's test mode where there is one, then checks wiring and the control board before ordering it, since boards are among the costlier parts.
Water level sensingA pressure switch or sensor tells the control how much water is in the tub. A blocked air tube or failed switch can cause overfilling, underfilling or a washer that will not move on to the next step.
Drain hose and standpipeThe drain hose runs to a standpipe or laundry sink. A kinked hose, a clog in the standpipe or a hose pushed too far down the pipe can stop draining or siphon water out mid-fill.

Troubleshooting first? Start with washer smells like mildew or washer not draining.

Leaks and Safe Shutoff

Turn off the water supply valves before disconnecting or reconnecting the washer's fill hoses. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection

Unplug the washer before servicing or cleaning it; pressing the power button does not disconnect it from the electrical supply. Source: GE Appliances - Washer Owner's Manual

Do not make an airtight seal between the drain hose and the standpipe or restrict the hose; standpipe height limits vary by model (Maytag's high-efficiency guide allows 18 to 96 inches). Source: Maytag - High-Efficiency Washer Installation Instructions

More: where washer leaks come from.

Washing Machine Repair Cost Ranges

A washer repair is usually a single part plus labor. Reference ranges from published cost guides:

For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

What Granite Shoals Owners Should Know

Most washer calls in Granite Shoals come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)

In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.

How to Choose a Washing Machine Technician Near Granite Shoals

  • If the washer is leaking, will you find where the water starts before quoting a part?
  • If a part has to be ordered, how soon can you come back to finish?
  • Can you give a written estimate before ordering parts?

Washing Machine Repair FAQs: Granite Shoals, TX

How much does washing machine repair cost in Granite Shoals?
Most companies charge a service call or diagnostic fee that is often applied to the repair if you go ahead. Common jobs such as a lid switch, inlet valve, drain pump or drive belt are usually worth fixing on a washer that is otherwise sound. Our washing machine repair cost guide lists published ranges.
Which areas near Granite Shoals do these technicians cover?
The companies on this page are within driving distance of Granite Shoals. Each one sets its own service area, so check the distance shown and confirm your address when you call.
What stops a washer from spinning?
An unbalanced load, water that will not drain, or a lid switch or door lock that is not engaging stops most spin cycles. If those check out, a technician looks at the drive belt, motor coupling, motor and control.
Is there anything I can try first?
Make sure the washer is plugged in and the outlet works, the lid or door closes fully, and both water valves are open. If the washer is leaking, unplug it and turn off both supply valves before doing anything else.

Washer Repair by Brand in Granite Shoals

Washing Machine Repair Near Granite Shoals

A clear drain filter, open supply valves and the model number in hand make any washer repair in Granite Shoals faster and cheaper.

Skip the calling around: we will find a washer tech for you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech