Whirlpool owners in Rogersville usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving Rogersville, with those that mention Whirlpool first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Whirlpool, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Whirlpool Washers Near Rogersville
40 repair companies serve Rogersville from within 60 miles. The rest are spread across Knoxville (9), Johnson City (4), and Greeneville (3). Distances run up to about 60 miles. Guaranteed Appliance, Appliances and Repair- Greeneville is the nearest, roughly 19.4 miles from Rogersville. 1 lists Whirlpool specifically. Rated companies nearby average 4.3 stars across 38 businesses. Rogersville is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Companies are shown by relevance and distance from Rogersville. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Name washers or washing machines in their listing | 10 |
|---|---|
| Three nearest companies, miles away | 19.4, 19.9, 21.2 |
| Mention Whirlpool | 1 |
| Repair companies inside 60 miles | 40 |
| With 4.5+ stars and at least 10 reviews | 14 |
| Listing Saturday hours | 20 |
At the top of the Rogersville list: Sears Appliance Repair (19.9 miles away, based in Greeneville, 4.5 stars from 119 reviews, lists Saturday hours); Mr. Appliance of the Tri-Cities (29.8 miles away, based in Gray, 4.5 stars from 1,004 reviews); Fuse Service HVAC & Appliance Repair Knoxville (48.8 miles away, based in Sevierville, 4.9 stars from 84 reviews); Sears Appliance Repair (35.2 miles away, based in Johnson City, 4.4 stars from 277 reviews, lists Saturday hours).
Whirlpool Washer Lines and Features
What a Whirlpool Washer Technician Deals With
High-efficiency Whirlpool washers need HE detergent only, because excess suds can stop the pump from draining and the drum from spinning. Source: Whirlpool - HE Detergent use in a Washer
Both top and front load models will only run their spin when the lid or door switch registers the lid or door as fully closed and latched. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
Whirlpool Washer Symptoms and First Checks
- Washer won't start. Check that the washer is plugged in and the breaker has not tripped, turn off the control lock if it is on, and reset the washer by cutting power for at least a minute. Source: Whirlpool - How to reset a washing machine
- Washer smells. Run the Clean Washer cycle monthly, use only HE detergent, take clothes out promptly, and leave the door open between loads. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
Reading a Whirlpool Washer Error Code
| Code | What it means |
|---|---|
| F7 E1 | Motor speed sensing problem; check that shipping bolts are removed and the washer is not overloaded. Source: Whirlpool - Error Codes in Front Load Washers |
| rL / F34 | Items were left in the drum when the Clean Washer cycle was started. Source: Whirlpool - Error Codes in Front Load Washers |
| Int | The cycle was paused or canceled, and the washer may drain and spin for a while before it stops. Source: Whirlpool - Error Codes in Front Load Washers |
When to Call for Whirlpool Washer Repair
- Washer will not start or the lid or door stays locked
- Burning smell or a motor that hums without turning
- Loud banging, shaking or walking during the spin
What a Washing Machine Technician Checks
Care Whirlpool Recommends for Its Washers
- Clean the front load drain pump filter every few months or whenever lint builds up, on models that have one. Source: Whirlpool - Cleaning the Pump Filter - Front Load Washer
- Leave the front load door ajar between loads and remove wet clothes promptly so moisture can dry out. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
What Whirlpool Washer Repairs Cost
Most Whirlpool washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- How old the washer is
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Laundry Notes for Rogersville, TN
Most washer calls in Rogersville come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Tennessee's Board for Licensing Contractors does not list an appliance repair license among the licenses it issues (general contractor, home improvement, limited licensed electrician and limited licensed plumber). Source: TN Board for Licensing Contractors
In Tennessee, you can check a license with the Tennessee Department of Commerce and Insurance: Verify a License or report a problem to the Tennessee Division of Consumer Affairs (Office of the Attorney General).
How to Choose a Washing Machine Technician Near Rogersville
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- How often do you repair Whirlpool washers, and how quickly can you get parts?
- What is the service call or diagnostic fee, and is it applied to the repair?
Whirlpool Washer Repair FAQs: Rogersville, TN
Where is the water under my washer coming from?
Why does my Whirlpool washer show an error code?
Should I repair or replace my Whirlpool washer?
More Washing Machine Repair in Rogersville, TN
More Whirlpool Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Whirlpool repair.