Most Whirlpool washer repairs in Bristol involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Bristol, with those that mention Whirlpool first, then the nearest appliance repair companies.
Washing Machine Repair Near Me is independent and not affiliated with Whirlpool. Listed companies are independent technicians who repair Whirlpool washers and other brands.
Who Works on Whirlpool Washers Near Bristol
16 repair companies serve Bristol from within 30 miles. 3 list an address in Bristol, and the rest are spread across Johnson City (4), Kingsport (3), and Elizabethton (1). Nearest on the list: American Appliance Inc, around 1.9 miles out. 1 lists Whirlpool specifically. The 16 rated companies in range average 4.2 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Appliance repair companies in range (30 mi) | 16 |
|---|---|
| Mention Whirlpool | 1 |
| Mention washer work | 5 |
| Distance to the three closest (mi) | 1.9, 2.5, 2.8 |
| Rated 4.5 stars or higher (10+ reviews) | 6 |
| Listing Saturday hours | 5 |
Closest matches for Bristol: Mr. Appliance of the Tri-Cities (17.0 miles away, based in Gray, 4.5 stars from 1,004 reviews); Sears Appliance Repair (17.5 miles away, based in Johnson City, 4.4 stars from 277 reviews, lists Saturday hours); Sears Appliance Repair (16.4 miles away, based in Abingdon, 4.4 stars from 147 reviews, lists Saturday hours); Sears Appliance Repair (16.6 miles away, based in Kingsport, 4.5 stars from 174 reviews, lists Saturday hours).
Whirlpool sells top-load agitator, top-load impeller, front-load, all-in-one combo, and commercial washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Whirlpool Washer Lines Technicians Work On
How Whirlpool Washers Are Built
High-efficiency Whirlpool washers need HE detergent only, because excess suds can stop the pump from draining and the drum from spinning. Source: Whirlpool - HE Detergent use in a Washer
Some front load models have an owner-accessible drain pump filter at the lower front of the cabinet, usually reached by removing a small access panel or drawer. Source: Whirlpool - Cleaning the Pump Filter - Front Load Washer
Whirlpool Washer Symptoms and First Checks
- Washer won't start. Check that the washer is plugged in and the breaker has not tripped, turn off the control lock if it is on, and reset the washer by cutting power for at least a minute. Source: Whirlpool - How to reset a washing machine
- Washer not filling. Make sure both hot and cold supply valves are fully open, the fill hoses are not kinked, and the inlet screens are not clogged with sediment. Source: Whirlpool - Why won't my washing machine fill with water
Whirlpool Washer Error Codes
| Code | What it means |
|---|---|
| F8 E1 / Lo FL | Low water flow into the washer; check the supply faucets, fill hoses and any anti-flood devices. Source: Whirlpool - Error Codes in Front Load Washers |
| F8 E2 | Dispenser system problem on select models, often a clogged detergent drawer or cartridge. Source: Whirlpool - Error Codes in Front Load Washers |
| F7 E1 | Motor speed sensing problem; check that shipping bolts are removed and the washer is not overloaded. Source: Whirlpool - Error Codes in Front Load Washers |
Whirlpool Washer Problems Worth a Service Call
- An error code on the display
- Washer fills slowly, will not fill, or keeps filling
- Musty or mildew smell from the drum or door seal
What a Washing Machine Technician Checks
Care Whirlpool Recommends for Its Washers
- Replace the water fill hoses about every five years. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
- Run the Clean Washer cycle once a month with affresh cleaner or regular liquid chlorine bleach to keep the washer fresh. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
What Whirlpool Washer Repairs Cost
Price the repair before replacing a Whirlpool washer. Published ranges for common jobs:
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- How old the washer is
- Where the washer drains (standpipe or laundry sink)
- Any error code shown on the display
Around Bristol
Most washer calls in Bristol come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Tennessee's Board for Licensing Contractors does not list an appliance repair license among the licenses it issues (general contractor, home improvement, limited licensed electrician and limited licensed plumber). Source: TN Board for Licensing Contractors
In Tennessee, you can check a license with the Tennessee Department of Commerce and Insurance: Verify a License or report a problem to the Tennessee Division of Consumer Affairs (Office of the Attorney General).
Hiring a Washer Repair Company in Bristol
- Can you give a written estimate before ordering parts?
- What is the service call or diagnostic fee, and is it applied to the repair?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
Whirlpool Washer Repair FAQs: Bristol, TN
Should I repair or replace my Whirlpool washer?
Where is the water under my washer coming from?
Which Bristol technicians work on Whirlpool?
What should I do about a Whirlpool error code?
Related Repair Pages for Bristol
Whirlpool Washer Repair Near Bristol
Write down any error code your Whirlpool washer shows and at what point in the cycle it appears. It helps a Bristol technician bring the right parts.