Whirlpool owners in Taylors usually want two things from a repair company: experience with the brand and quick access to parts. We flag companies whose listing or website mentions Whirlpool and fill in with nearby appliance repair companies so you always have options.
Washing Machine Repair Near Me is independent and not affiliated with Whirlpool. Listed companies are independent technicians who repair Whirlpool washers and other brands.
Who Works on Whirlpool Washers Near Taylors
We found 31 appliance repair companies within 30 miles of Taylors. 1 list an address in Taylors, and the rest are spread across Greenville (10), Spartanburg (5), and Greer (2). Distances run up to about 29 miles. No company within 90 miles of Taylors mentions Whirlpool by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is Appliance Medic, about 0.7 miles away. The 31 rated companies in range average 4.4 stars.
Companies are shown by relevance and distance from Taylors. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention Whirlpool | 0 |
|---|---|
| Name washers or washing machines in their listing | 8 |
| Rated 4.5 stars or higher (10+ reviews) | 14 |
| Listing Saturday hours | 17 |
| Repair companies inside 30 miles | 31 |
| Distance to the three closest (mi) | 0.7, 4.7, 4.7 |
The leading options for Taylors are The Olde Homestead, Inc. (7.1 miles away, based in Greenville, 4.9 stars from 1,104 reviews); Mr. Appliance of Greater Greenville (6.7 miles away, based in Greenville, 4.8 stars from 1,221 reviews); Appliance GrandMasters (9.8 miles away, based in Greenville, 4.7 stars from 1,162 reviews, lists Saturday hours); Sears Appliance Repair (8.9 miles away, based in Greenville, 4.4 stars from 72 reviews, lists Saturday hours).
Know which Whirlpool washer you have before you call. Whirlpool makes top-load agitator, top-load impeller, front-load, all-in-one combo, and commercial models, and the technician will ask.
Whirlpool Washer Lines and Features
What a Whirlpool Washer Technician Deals With
Some front load models have an owner-accessible drain pump filter at the lower front of the cabinet, usually reached by removing a small access panel or drawer. Source: Whirlpool - Cleaning the Pump Filter - Front Load Washer
Both top and front load models will only run their spin when the lid or door switch registers the lid or door as fully closed and latched. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
Common Whirlpool Washer Problems
- Washer won't start. Check that the washer is plugged in and the breaker has not tripped, turn off the control lock if it is on, and reset the washer by cutting power for at least a minute. Source: Whirlpool - How to reset a washing machine
- Washer not filling. Make sure both hot and cold supply valves are fully open, the fill hoses are not kinked, and the inlet screens are not clogged with sediment. Source: Whirlpool - Why won't my washing machine fill with water
Whirlpool Washer Error Codes
| Code | What it means |
|---|---|
| F9 E1 | Draining is taking longer than expected; check the drain hose and standpipe and avoid excess suds. Source: Whirlpool - Error Codes in Front Load Washers |
| Sud / Sd | Too many suds were detected, usually from non-HE or too much detergent. Source: Whirlpool - Error Codes in Front Load Washers |
| dEt | Detergent cartridge is not detected on models with a bulk dispenser. Source: Whirlpool - Error Codes in Front Load Washers |
When to Call for Whirlpool Washer Repair
- Burning smell or a motor that hums without turning
- Washer will not spin, or clothes come out soaking wet
- Loud banging, shaking or walking during the spin
What Gets Fixed on a Taylors Washer Call
Owner Care for Whirlpool Washers
- Check and brush clean the small mesh screens where the fill hoses connect at the back of the washer if filling slows. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
- Replace the water fill hoses about every five years. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
Budgeting for a Whirlpool Washer Repair
Price the repair before replacing a Whirlpool washer. Published ranges for common jobs:
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Any error code shown on the display
- Where the washer drains (standpipe or laundry sink)
- How old the washer is
Local Notes for Taylors
Most washer calls in Taylors come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
South Carolina does not issue a license specific to appliance repair; mechanical work such as plumbing, heating, air conditioning and refrigeration is licensed by the Contractor's Licensing Board for commercial-scale jobs and by the Residential Builders Commission for residential HVAC and plumbing. Source: S.C. Code Title 40, Chapter 11 (Contractors), South Carolina Legislature
In South Carolina, you can check a license with the SC LLR License Lookup or report a problem to the South Carolina Department of Consumer Affairs.
Questions to Ask a Taylors Washer Technician
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- What is the service call or diagnostic fee, and is it applied to the repair?
- If a part has to be ordered, how soon can you come back to finish?
Whirlpool Washer Repair FAQs: Taylors, SC
How do I get rid of a washer mildew smell?
Why does my Whirlpool washer show an error code?
Why is my washer leaking?
What stops a washer from spinning?
More Washing Machine Repair in Taylors, SC
Whirlpool Washer Repair Near Taylors
Before you call, find the model and serial number on your Whirlpool washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.